This site requires javascript to be enabled.

Results for

xxx

Update token

PUT https://{domainname}/v1/{merchantId}/tokens/{tokenId}

Tokens

Using our tokenization service you can tokenize re-usable payment data like card data, bank account data including Direct Debit Mandates and PayPal BillingAgreementIDs. The main purpose for tokens is re-use of payment details. The additional benefit is that you do not need to store any sensitive payment details on your server, while still having the benefit to be able to re-use them. This allows you to process recurring card transactions without actually having access to the real card data.

Tokens can be used for two types of transactions:

  • Recurring: Automatically charging your consumer in a regular, e.g. monthly, time frame;
  • One-off: Charge the consumer without the consumer having to re-enter all of their payment details.

The second scenario can be used to facilitate a one-click checkout solution, that would still allow the consumer to enter only their CVV value for a card transaction. CVV values can't be tokenized as they are not allowed to be stored at all.

Besides the re-use of payment data, tokens have one other major use-case: Direct Debit Mandates. Especially SEPA Direct Debit transactions require that the mandate for the transactions is managed through a token with an associated mandate. Mandates are created in one go with the token, but can have a state that requires that they are approved before they can be used. As the mandate process is in most cases an offline process the approval will allow you to set the location and date where and when the mandate was signed by the consumer. Without an approved SEPA mandate you will not be able to process any payments regarding this mandate.

Request

Use PUT on a specific token to update the tokenized data. Any data that is supplied will overwrite any of the existing data in the token.

As the card number is used as a key this can't be updated. Instead of updating you should add a new token with the new card number. The same holds true of the payment product; this can not be updated.
The payload can, next to the paymentProductID contain one of the following types of objects to update tokenized data:
  • card data
  • SEPA Direct Debit data (including mandate information)
  • Non SEPA Direct Debit data
  • eWallet data

PayloadUpdateTokenRequest

Properties
Property Type Required Details
close

Description

Object containing card details
  • SDK Object type
    TokenCard
  • Property is part of a group
    Learn more

    Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call.

    If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.

close

Description

An alias for the token. This can be used to visually represent the token.
If no alias is given in Create token calls, a payment product specific default is used, e.g. the obfuscated card number for card payment products.
Do not include any unobfuscated sensitive data in the alias.
close

Description

Object containing the details of the customer
  • SDK Object type
    CustomerToken
close

Description

Object containing the billing address details
  • SDK Object type
    Address
close

Description

Additional address information. The additionalInfo is truncated after 10 characters for payments, refunds or payouts that are processed by the WL Online Payment Acceptance platform
close

Description

City
Note: For payments with product 1503 the maximum length is not 40 but 20.
close

Description

ISO 3166-1 alpha-2 country code
close

Description

House number. The houseNumber is truncated after 10 characters for payments, refunds or payouts that are processed by the WL Online Payment Acceptance platform
close

Description

Full name of the state or province
close

Description

ISO 3166-2 alpha-3 state code
Notes:
  • The maximum length for 3-D Secure version 2 is AN3 for payments that are processed by the GlobalCollect platform
  • The maximum length for paymentProductId 1503 (Boleto) is AN2 for payments that are processed by the GlobalCollect platform
  • The maximum length is 3 for payments that are processed by the WL Online Payment Acceptance platform
close

Description

Streetname
close

Description

Zip code
Note: For payments with product 1503 the maximum length is not 10 but 8.
close

Description

Object containing company information
  • SDK Object type
    CompanyInformation
close

Description

Name of company, as a customer
close

Description

Local VAT number of the company
close

Description

Your identifier for the customer. It can be used as a search criteria in the GlobalCollect Payment Console and is also included in the GlobalCollect report files. It is used in the fraud-screening process for payments on the Ogone Payment Platform.
close

Description

Object containing personal information of the customer
  • SDK Object type
    PersonalInformationToken
close

Description

Given name(s) or first name(s) of the customer
  • SDK Object type
    PersonalNameToken
close

Description

Given name(s) or first name(s) of the customer
close

Description

Surname(s) or last name(s) of the customer
close

Description

Middle name - In between first name and surname - of the customer
close
Deprecated: Use companyInformation.vatNumber instead

Description

Local VAT number of the company
close

Description

Object containing the card tokenizable details
  • SDK Object type
    TokenCardData
close

Description

Object containing the card details (without CVV)
  • SDK Object type
    CardWithoutCvv
close

Description

The complete credit/debit card number (also know as the PAN). The minimum input length is 12 digits.
close

Description

Card holder's name on the card
close

Description

Expiry date of the card
Format: MMYY
close

Description

Issue number on the card (if applicable)
close

Description

Date of the first transaction (for ATOS)
Format: YYYYMMDD
close

Description

Reference of the provider (of the first transaction) - used to store the ATOS Transaction Certificate
close

Description

Object containing eWallet details
  • SDK Object type
    TokenEWallet
  • Property is part of a group
    Learn more

    Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call.

    If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.

close

Description

An alias for the token. This can be used to visually represent the token.
If no alias is given in Create token calls, a payment product specific default is used, e.g. the obfuscated card number for card payment products.
Do not include any unobfuscated sensitive data in the alias.
close

Description

Object containing the details of the customer
  • SDK Object type
    CustomerToken
close

Description

Object containing the billing address details
  • SDK Object type
    Address
close

Description

Additional address information. The additionalInfo is truncated after 10 characters for payments, refunds or payouts that are processed by the WL Online Payment Acceptance platform
close

Description

City
Note: For payments with product 1503 the maximum length is not 40 but 20.
close

Description

ISO 3166-1 alpha-2 country code
close

Description

House number. The houseNumber is truncated after 10 characters for payments, refunds or payouts that are processed by the WL Online Payment Acceptance platform
close

Description

Full name of the state or province
close

Description

ISO 3166-2 alpha-3 state code
Notes:
  • The maximum length for 3-D Secure version 2 is AN3 for payments that are processed by the GlobalCollect platform
  • The maximum length for paymentProductId 1503 (Boleto) is AN2 for payments that are processed by the GlobalCollect platform
  • The maximum length is 3 for payments that are processed by the WL Online Payment Acceptance platform
close

Description

Streetname
close

Description

Zip code
Note: For payments with product 1503 the maximum length is not 10 but 8.
close

Description

Object containing company information
  • SDK Object type
    CompanyInformation
close

Description

Name of company, as a customer
close

Description

Local VAT number of the company
close

Description

Your identifier for the customer. It can be used as a search criteria in the GlobalCollect Payment Console and is also included in the GlobalCollect report files. It is used in the fraud-screening process for payments on the Ogone Payment Platform.
close

Description

Object containing personal information of the customer
  • SDK Object type
    PersonalInformationToken
close

Description

Given name(s) or first name(s) of the customer
  • SDK Object type
    PersonalNameToken
close

Description

Given name(s) or first name(s) of the customer
close

Description

Surname(s) or last name(s) of the customer
close

Description

Middle name - In between first name and surname - of the customer
close
Deprecated: Use companyInformation.vatNumber instead

Description

Local VAT number of the company
close

Description

Object containing the eWallet tokenizable data
  • SDK Object type
    TokenEWalletData
close

Description

Identification of the PayPal recurring billing agreement
close

Description

Object containing the non SEPA Direct Debit details
  • SDK Object type
    TokenNonSepaDirectDebit
  • Property is part of a group
    Learn more

    Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call.

    If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.

close

Description

An alias for the token. This can be used to visually represent the token.
If no alias is given in Create token calls, a payment product specific default is used, e.g. the obfuscated card number for card payment products.
Do not include any unobfuscated sensitive data in the alias.
close

Description

Object containing the details of the customer
  • SDK Object type
    CustomerToken
close

Description

Object containing the billing address details
  • SDK Object type
    Address
close

Description

Additional address information. The additionalInfo is truncated after 10 characters for payments, refunds or payouts that are processed by the WL Online Payment Acceptance platform
close

Description

City
Note: For payments with product 1503 the maximum length is not 40 but 20.
close

Description

ISO 3166-1 alpha-2 country code
close

Description

House number. The houseNumber is truncated after 10 characters for payments, refunds or payouts that are processed by the WL Online Payment Acceptance platform
close

Description

Full name of the state or province
close

Description

ISO 3166-2 alpha-3 state code
Notes:
  • The maximum length for 3-D Secure version 2 is AN3 for payments that are processed by the GlobalCollect platform
  • The maximum length for paymentProductId 1503 (Boleto) is AN2 for payments that are processed by the GlobalCollect platform
  • The maximum length is 3 for payments that are processed by the WL Online Payment Acceptance platform
close

Description

Streetname
close

Description

Zip code
Note: For payments with product 1503 the maximum length is not 10 but 8.
close

Description

Object containing company information
  • SDK Object type
    CompanyInformation
close

Description

Name of company, as a customer
close

Description

Local VAT number of the company
close

Description

Your identifier for the customer. It can be used as a search criteria in the GlobalCollect Payment Console and is also included in the GlobalCollect report files. It is used in the fraud-screening process for payments on the Ogone Payment Platform.
close

Description

Object containing personal information of the customer
  • SDK Object type
    PersonalInformationToken
close

Description

Given name(s) or first name(s) of the customer
  • SDK Object type
    PersonalNameToken
close

Description

Given name(s) or first name(s) of the customer
close

Description

Surname(s) or last name(s) of the customer
close

Description

Middle name - In between first name and surname - of the customer
close
Deprecated: Use companyInformation.vatNumber instead

Description

Local VAT number of the company
close

Description

Object containing the mandate details
  • SDK Object type
    MandateNonSepaDirectDebit
close

Description

Object containing specific data for Direct Debit UK
  • SDK Object type
    TokenNonSepaDirectDebitPaymentProduct705SpecificData
  • Property is part of a group
    Learn more

    Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call.

    If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.

close

Description

Core reference number for the direct debit instruction in UK
close

Description

Object containing account holder name and bank account information
  • SDK Object type
    BankAccountBban
close

Description

Name of the account holder
close

Description

Bank account number
close

Description

Bank code
close

Description

Name of the bank
close

Description

Branch code
close

Description

Bank check digit
close

Description

ISO 3166-1 alpha-2 country code of the country where the bank account is held For UK payouts this value is automatically set to GB as only payouts to UK accounts are supported.
close

Description

Object containing specific data for ACH
  • SDK Object type
    TokenNonSepaDirectDebitPaymentProduct730SpecificData
  • Property is part of a group
    Learn more

    Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call.

    If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.

close

Description

Object containing account holder name and bank account information
  • SDK Object type
    BankAccountBban
close

Description

Name of the account holder
close

Description

Bank account number
close

Description

Bank code
close

Description

Name of the bank
close

Description

Branch code
close

Description

Bank check digit
close

Description

ISO 3166-1 alpha-2 country code of the country where the bank account is held For UK payouts this value is automatically set to GB as only payouts to UK accounts are supported.
close

Description

Object containing the SEPA Direct Debit details
  • SDK Object type
    TokenSepaDirectDebitWithoutCreditor
  • Property is part of a group
    Learn more

    Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call.

    If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.

close

Description

An alias for the token. This can be used to visually represent the token.
If no alias is given in Create token calls, a payment product specific default is used, e.g. the obfuscated card number for card payment products.
Do not include any unobfuscated sensitive data in the alias.
close

Description

Object containing the details of the customer
  • SDK Object type
    CustomerTokenWithContactDetails
close

Description

Object containing the billing address details
  • SDK Object type
    Address
close

Description

Additional address information. The additionalInfo is truncated after 10 characters for payments, refunds or payouts that are processed by the WL Online Payment Acceptance platform
close

Description

City
Note: For payments with product 1503 the maximum length is not 40 but 20.
close

Description

ISO 3166-1 alpha-2 country code
close

Description

House number. The houseNumber is truncated after 10 characters for payments, refunds or payouts that are processed by the WL Online Payment Acceptance platform
close

Description

Full name of the state or province
close

Description

ISO 3166-2 alpha-3 state code
Notes:
  • The maximum length for 3-D Secure version 2 is AN3 for payments that are processed by the GlobalCollect platform
  • The maximum length for paymentProductId 1503 (Boleto) is AN2 for payments that are processed by the GlobalCollect platform
  • The maximum length is 3 for payments that are processed by the WL Online Payment Acceptance platform
close

Description

Streetname
close

Description

Zip code
Note: For payments with product 1503 the maximum length is not 10 but 8.
close

Description

Object containing company information
  • SDK Object type
    CompanyInformation
close

Description

Name of company, as a customer
close

Description

Local VAT number of the company
close

Description

Object containing contact details like email address and phone number
  • SDK Object type
    ContactDetailsToken
close

Description

Email address of the customer
close

Description

Preference for the type of email message markup
  • plain-text
  • html
close

Description

Your identifier for the customer. It can be used as a search criteria in the GlobalCollect Payment Console and is also included in the GlobalCollect report files. It is used in the fraud-screening process for payments on the Ogone Payment Platform.
close

Description

Object containing personal information of the customer
  • SDK Object type
    PersonalInformationToken
close

Description

Given name(s) or first name(s) of the customer
  • SDK Object type
    PersonalNameToken
close

Description

Given name(s) or first name(s) of the customer
close

Description

Surname(s) or last name(s) of the customer
close

Description

Middle name - In between first name and surname - of the customer
close
Deprecated: Use companyInformation.vatNumber instead

Description

Local VAT number of the company
close

Description

Object containing the mandate details
  • SDK Object type
    MandateSepaDirectDebitWithoutCreditor
close

Description

Object containing Account holder and IBAN information
  • SDK Object type
    BankAccountIban
close

Description

Name in which the account is held.
close

Description

The IBAN is the International Bank Account Number. It is an internationally agreed format for the BBAN and includes the ISO country code and two check digits.
close

Description

Identifies the contract between customer and merchant
close

Description

Object containing information on the debtor
  • SDK Object type
    Debtor
close

Description

Additional information about the debtor's address, like Suite II, Apartment 2a
close

Description

City of the debtor's address
close

Description

ISO 3166-1 alpha-2 country code of the debtor's address
close

Description

Debtor first name
close

Description

House number of the debtor's address
close

Description

State of debtor address
close

Description

ISO 3166-2 alpha-3 state code
Notes:
  • The maximum length for 3-D Secure version 2 is AN3.
  • The maximum length for paymentProductId 1503 (Boleto) is AN2.
close

Description

Street of debtor's address
close

Description

Debtor's last name
close

Description

Prefix of the debtor's last name
close

Description

ZIP code of the debtor's address
close

Description

  • true
  • false
close

Description

Object containing the details of the mandate approval
  • SDK Object type
    MandateApproval
close

Description

The date when the mandate was signed
Format: YYYYMMDD
close

Description

The city where the mandate was signed
close

Description

  • true = Mandate is signed
  • false = Mandate is not signed
close

Description

Indicates whether a pre-notification should be sent to the customer.
  • do-not-send - Do not send a pre-notification
  • send-on-first-collection - Send a pre-notification
close

Description

Payment product identifier
Please see payment products for a full overview of possible values.

Request example

SDK: .NET

This scenario you will probably use the most

  • var billingAddress = new Address();
    billingAddress.AdditionalInfo = "b";
    billingAddress.City = "Monument Valley";
    billingAddress.CountryCode = "US";
    billingAddress.HouseNumber = "13";
    billingAddress.State = "Utah";
    billingAddress.Street = "Desertroad";
    billingAddress.Zip = "84536";
    
    var companyInformation = new CompanyInformation();
    companyInformation.Name = "Acme Labs";
    
    var name = new PersonalNameToken();
    name.FirstName = "Wile";
    name.Surname = "Coyote";
    name.SurnamePrefix = "E.";
    
    var personalInformation = new PersonalInformationToken();
    personalInformation.Name = name;
    
    var customer = new CustomerToken();
    customer.BillingAddress = billingAddress;
    customer.CompanyInformation = companyInformation;
    customer.MerchantCustomerId = "1234";
    customer.PersonalInformation = personalInformation;
    
    var cardWithoutCvv = new CardWithoutCvv();
    cardWithoutCvv.CardNumber = "4567350000427977";
    cardWithoutCvv.CardholderName = "Wile E. Coyote";
    cardWithoutCvv.ExpiryDate = "1299";
    cardWithoutCvv.IssueNumber = "12";
    
    var data = new TokenCardData();
    data.CardWithoutCvv = cardWithoutCvv;
    
    var card = new TokenCard();
    card.Customer = customer;
    card.Data = data;
    
    var body = new UpdateTokenRequest();
    body.Card = card;
    body.PaymentProductId = 1;
    
    await client.V1.WithNewMerchant("merchantId").Tokens.Update("tokenId", body);
    
  • var billingAddress = new Address();
    billingAddress.CountryCode = "US";
    
    var customer = new CustomerToken();
    customer.BillingAddress = billingAddress;
    
    var cardWithoutCvv = new CardWithoutCvv();
    cardWithoutCvv.CardNumber = "****************";
    cardWithoutCvv.ExpiryDate = "****";
    
    var data = new TokenCardData();
    data.CardWithoutCvv = cardWithoutCvv;
    
    var card = new TokenCard();
    card.Customer = customer;
    card.Data = data;
    
    var body = new UpdateTokenRequest();
    body.Card = card;
    body.PaymentProductId = 1;
    
    await client.V1.WithNewMerchant("merchantId").Tokens.Update("tokenId", body);
    
  • var billingAddress = new Address();
    billingAddress.AdditionalInfo = "b";
    billingAddress.City = "Monument Valley";
    billingAddress.CountryCode = "US";
    billingAddress.HouseNumber = "13";
    billingAddress.State = "Utah";
    billingAddress.Street = "Desertroad";
    billingAddress.Zip = "84536";
    
    var companyInformation = new CompanyInformation();
    companyInformation.Name = "Acme Labs";
    
    var name = new PersonalNameToken();
    name.FirstName = "Wile";
    name.Surname = "Coyote";
    name.SurnamePrefix = "E.";
    
    var personalInformation = new PersonalInformationToken();
    personalInformation.Name = name;
    
    var customer = new CustomerToken();
    customer.BillingAddress = billingAddress;
    customer.CompanyInformation = companyInformation;
    customer.MerchantCustomerId = "1234";
    customer.PersonalInformation = personalInformation;
    
    var cardWithoutCvv = new CardWithoutCvv();
    cardWithoutCvv.CardNumber = "****************";
    cardWithoutCvv.CardholderName = "Wile E. Coyote";
    cardWithoutCvv.ExpiryDate = "****";
    
    var data = new TokenCardData();
    data.CardWithoutCvv = cardWithoutCvv;
    
    var card = new TokenCard();
    card.Customer = customer;
    card.Data = data;
    
    var body = new UpdateTokenRequest();
    body.Card = card;
    body.PaymentProductId = 1;
    
    await client.V1.WithNewMerchant("merchantId").Tokens.Update("tokenId", body);
    

Responses

Please find below an overview of the possible responses.

Response 204 - No content

A 204 response denotes that we successfully processed the update request.

Response 400 - Bad requestErrorResponse

Properties
Property Type Required Details
close

Description

Unique reference, for debugging purposes, of this error response
close

Description

List of one or more errors
close

Description

Contains detailed information on one single error.
  • SDK Object type
    APIError
close

Description

Category the error belongs to. The category should give an indication of the type of error you are dealing with. Possible values:
  • CONNECT_PLATFORM_ERROR - indicating that a functional error has occurred in the Connect platform.
  • PAYMENT_PLATFORM_ERROR - indicating that a functional error has occurred in the Payment platform.
  • IO_ERROR - indicating that a technical error has occurred within the Connect platform or between Connect and any of the payment platforms or third party systems.
close

Description

Error code
close

Description

HTTP status code for this error that can be used to determine the type of error
close

Description

ID of the error. This is a short human-readable message that briefly describes the error.
close

Description

Human-readable error message that is not meant to be relayed to customer as it might tip off people who are trying to commit fraud
close

Description

Returned only if the error relates to a value that was missing or incorrect.
Contains a location path to the value as a JSonata query.
Some common examples:
  • a.b selects the value of property b of root property a,
  • a[1] selects the first element of the array in root property a,
  • a[b='some value'] selects all elements of the array in root property a that have a property b with value 'some value'.
close

Description

ID of the request that can be used for debugging purposes

Response example

SDK: .NET

This scenario you will probably use the most

  • {
        "errorId" : "15eabcd5-30b3-479b-ae03-67bb351c07e6-00000092",
        "errors" : [
            {
                "code" : "20000000",
                "propertyName" : "bankAccountBban.accountNumber",
                "message" : "PARAMETER_NOT_FOUND_IN_REQUEST"
            }
        ]
    }