This site requires javascript to be enabled.

  • Search AI-powered

Results for

xxx

Get hosted checkout status

GET https://{domainname}/v1/{merchantId}/hostedcheckouts/{hostedCheckoutId}

Hosted Checkouts

Using hostedCheckouts you can process transactions using MyCheckout, our easy to use hosted responsive payment pages. Your consumers will be able to complete the payment process using MyCheckout that is hosted by us. Using these pages to capture card details and process card transactions will greatly reduce not only your integration efforts, but it will also reduce your 'PCI exposure' to the lowest level (SAQ-A).

The layout and look and feel of the MyCheckout Pages can be managed through the Configuration Center. Here you will find the powerful, yet very intuitive MyCheckout editor that lets you create multiple variations of your hosted payment pages hosted by us. If you have created multiple versions you are able to direct your consumers to specific variants through this API. This allows you easily test out different variations or continue specific campaigns all the way through to the payment pages.

The MyCheckout pages automatically adapt based on screen width of your consumers device. Clients that do not support JavaScript to be run on the client will still be able to make payments (although they will lack all the client side validation and automatic formatting to assist them). Please note that both the responsive nature and the support for clients without JavaScript support might not apply to 3rd party payment pages that the consumer might be redirected to to complete the payment.

MyCheckout is also modular in its setup, allowing you to specify exactly what you want us to do as part of your checkout flow. You decide if we should display the payment product selection and/or the confirmation page after a successful payment.

In case a payment product that requires the consumer to (manually) push the funds was selected, you will have the option to show these instructions again at a later moment. You could show them on your website in an area where the consumer can track the progress of their order. To avoid multiple payments you should however avoid showing them again for transactions that have already been paid.

Request

You can retrieve the current status of the hosted checkout by doing a get on the hostedCheckoutId. When a payment has been created during the hosted checkout session the details are returned in this object.

Sessions have a maximum life span of 2 hours. This means that you can only retrieve this information while the session has not timed-out.
The status of the hostedCheckout and the payment will change when the consumer is still busy completing the hosted checkout session.
The request does not have any additional input parameters.

Request example

SDK: Go

This scenario you will probably use the most

  • response, err := client.V1().Merchant("merchantId").Hostedcheckouts().Get("hostedCheckoutId", nil)
    

Responses

In case the hostedCheckoutId has not yet expired the response to the GET request will contain the status of the hosted checkout. In case the consumer has also made a payment during the session a createdPaymentOutput object is returned containing the details of the created payment object. Please note that for payments that involve a redirect to a 3rd party, like iDeal or PayPal, the payment might not have been completed at the moment you retrieved the status. This is indicated by the status contained in the createdPaymentOutput object.

Response 200 - OKdomain.GetHostedCheckoutResponse

The request was processed correctly and a valid response is returned. In case a payment was created during the hosted checkout the details are returned in the createdPaymentOutput object.

Properties
Property Type Required Details
close

Description

When a payment has been created during the hosted checkout session this object will return the details.
  • SDK Object type
    domain.CreatedPaymentOutput
close

Description

Object that contains the action, including the needed data, that you should perform next, like showing instruction, showing the transaction results or redirect to a third party to complete the payment
  • SDK Object type
    domain.DisplayedData
close

Description

Action merchants needs to take in the online payment process. Possible values are:
  • SHOW_INSTRUCTIONS - The customer needs to be shown payment instruction using the details found in showData. Alternatively the instructions can be rendered by us using the renderingData
  • SHOW_TRANSACTION_RESULTS - The customer needs to be shown the transaction results using the details found in showData. Alternatively the instructions can be rendered by us using the renderingData
close

Description

This property contains the blob with data for the instructions rendering service.

This service will be available at the following endpoint: http(s)://{{merchant specific subdomain}}.{{base MyCheckout hosted payment pages domain}}/instructions/{{merchantId}}/{{clientSessionId}}

This instructions page rendering service accepts the following parameters:

  • instructionsRenderingData (required, the content of this property)
  • locale (optional, if present overrides default locale, e.g. "en_GB")
  • variant (optional, code of a variant, if present overrides default variant, e.g. "100")
  • customerId (required for Pix, otherwise optional, the customerId from a client session)
You can offer a link to a customer to see an instructions page for a payment done earlier. Because of the size of the instructionsRenderingData this will need to be set in a web form as a value of a hidden field. Before presenting the link you need to obtain a clientSessionId by creating a session using the S2S API. You will need to use the MyCheckout hosted payment pages domain hosted in the same region as the API domain used for the createClientSession call.

The instructionsRenderingData is a String blob that is presented to you via the Server API as part of the merchantAction (if available, and non-redirect) in the JSON return values for the createPayment call or the getHostedCheckoutStatus call (merchantAction inside createdPaymentOutput when available). You are responsible to store the instructionsRenderingData blob in order to be able to present the instructions page at a later time, when this information might no longer be available through Server API calls.

close

Description

Array of key value pairs of data that needs to be shown to the customer. This is returned for both the SHOW_INSTRUCTION as well as the SHOW_TRANSACTION_RESULTS actionType.
Note: The returned value for the key BARCODE is a base64 encoded gif image. By prepending 'data:image/gif;base64,' this value can be used as the source of an HTML inline image.
close
  • SDK Object type
    domain.KeyValuePair
close

Description

Name of the key or property
close

Description

Value of the key or property
close

Description

Indicates whether the customer ticked the "Remember my details for future purchases" checkbox on the MyCheckout hosted payment pages
close

Description

Object that holds the payment data
  • SDK Object type
    domain.Payment
close

Description

Hosted Checkout specific information. Populated if the payment was created on the GlobalCollect platform through a Hosted Checkout.
  • SDK Object type
    domain.HostedCheckoutSpecificOutput
close

Description

The ID of the Hosted Checkout Session in which the payment was made.
close

Description

Using the Configuration Center it is possible to create multiple variations of your MyCheckout payment pages. By specifying a specific variant you can force the use of another variant then the default. This allows you to test out the effect of certain changes to your hosted mandate pages in a controlled manner. Please note that you need to specify the ID of the variant.
close

Description

Our unique payment transaction identifier.
close

Description

Object containing payment details
  • SDK Object type
    domain.PaymentOutput
close

Description

Object containing amount and ISO currency code attributes
  • SDK Object type
    domain.AmountOfMoney
close

Description

Amount in cents and always having 2 decimals
close

Description

Three-letter ISO currency code representing the currency for the amount
close

Description

Amount that has been paid
close

Description

Amount that has been reversed
close

Description

Object containing the bank transfer payment method details
  • SDK Object type
    domain.BankTransferPaymentMethodSpecificOutput
  • Property is part of a group
    Learn more

    Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call.

    If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.

close

Description

Object containing the results of the fraud screening
  • SDK Object type
    domain.FraudResults
close

Description

Results from the fraud prevention check. Possible values are:
  • accepted - Based on the checks performed the transaction can be accepted
  • challenged - Based on the checks performed the transaction should be manually reviewed
  • denied - Based on the checks performed the transaction should be rejected
  • no-advice - No fraud check was requested/performed
  • error - The fraud check resulted in an error and the fraud check was thus not performed
close

Description

Object containing device fingerprinting details from InAuth
  • SDK Object type
    domain.InAuth
close

Description

The type of device used by the customer. Example values:
  • SMARTPHONE
  • PERSONAL_COMPUTER
  • TABLET
  • WEARABLE_COMPUTER
  • GAME_CONSOLE
  • SMART_TV
  • PDA
  • OTHER
  • UNKNOWN
close

Description

This is the device fingerprint value. Based on the amount of data that the device fingerprint collector script was able to collect, this will be a proxy ID for the device used by the customer.
close

Description

The score calculated on the basis of Anomalies, Velocity, Location, Integrity, List-Based, and Device Reputation. Range of the score is between 0 and 100. A lower value is better.
close

Description

The true IP address as determined by inAuth. This might be different from the IP address that you are seeing on your side due to the proxy piercing technology deployed by inAuth.
close

Description

The country of the customer based on the location of the True IP Address determined by inAuth.
close

Description

This object contains the results of Microsoft Fraud Protection risk assessment. Microsoft collects transaction data points and uses Adaptive AI that continuously learns to protect you against payment fraud, and the device fingerprinting details from the Microsoft Device Fingerprinting service.
  • SDK Object type
    domain.MicrosoftFraudResults
close

Description

Name of the clause within the applied policy that was triggered during the evaluation of this transaction.
close

Description

The country of the customer determined by Microsoft Device Fingerprinting.
close

Description

This is the device fingerprint value. Based on the amount of data that the device fingerprint collector script was able to collect, this will be a proxy ID for the device used by the customer.
close

Description

Result of the Microsoft Fraud Protection check. This contains the normalized fraud score from a scale of 0 to 100. A higher score indicates an increased risk of fraud.
close

Description

Name of the policy that was applied on during the evaluation of this transaction.
close

Description

The true IP address as determined by Microsoft Device Fingerprinting.
close

Description

The type of device used by the customer.
close

Description

Payment product identifier
Please see payment products for a full overview of possible values.
close

Description

Object containing the card payment method details
  • SDK Object type
    domain.CardPaymentMethodSpecificOutput
  • Property is part of a group
    Learn more

    Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call.

    If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.

close

Description

Card Authorization code as returned by the acquirer
close

Description

Object containing card details
  • SDK Object type
    domain.CardEssentials
close

Description

The complete credit/debit card number
close

Description

The card holder's name on the card.
close

Description

Expiry date of the card
Format: MMYY
close

Description

Fraud results contained in the CardFraudResults object
  • SDK Object type
    domain.CardFraudResults
close

Description

Result of the Address Verification Service checks. Possible values are:
  • A - Address (Street) matches, Zip does not
  • B - Street address match for international transactions—Postal code not verified due to incompatible formats
  • C - Street address and postal code not verified for international transaction due to incompatible formats
  • D - Street address and postal code match for international transaction, cardholder name is incorrect
  • E - AVS error
  • F - Address does match and five digit ZIP code does match (UK only)
  • G - Address information is unavailable; international transaction; non-AVS participant
  • H - Billing address and postal code match, cardholder name is incorrect (Amex)
  • I - Address information not verified for international transaction
  • K - Cardholder name matches (Amex)
  • L - Cardholder name and postal code match (Amex)
  • M - Cardholder name, street address, and postal code match for international transaction
  • N - No Match on Address (Street) or Zip
  • O - Cardholder name and address match (Amex)
  • P - Postal codes match for international transaction—Street address not verified due to incompatible formats
  • Q - Billing address matches, cardholder is incorrect (Amex)
  • R - Retry, System unavailable or Timed out
  • S - Service not supported by issuer
  • U - Address information is unavailable
  • W - 9 digit Zip matches, Address (Street) does not
  • X - Exact AVS Match
  • Y - Address (Street) and 5 digit Zip match
  • Z - 5 digit Zip matches, Address (Street) does not
  • 0 - No service available
close

Description

Result of the Card Verification Value checks. Possible values are:
  • M - CVV check performed and valid value
  • N - CVV checked and no match
  • P - CVV check not performed, not requested
  • S - Cardholder claims no CVV code on card, issuer states CVV-code should be on card
  • U - Issuer not certified for CVV2
  • Y - Server provider did not respond
  • 0 - No service available
close

Description

Resulting advice of the fraud prevention checks. Possible values are:
  • accepted - Based on the checks performed the transaction can be accepted
  • challenged - Based on the checks performed the transaction should be manually reviewed
  • denied - Based on the checks performed the transaction should be rejected
  • no-advice - No fraud check was requested/performed
  • error - The fraud check resulted an error. Note that the fraud check was thus not performed.
close

Description

Results of Fraugster fraud prevention check. Fraugster collects transaction data points such as name, email address, billing, etc. to analyze whether or not the transaction is fraudulent.
  • SDK Object type
    domain.FraugsterResults
close

Description

Result of the Fraugster check Contains the investigation points used during the evaluation
close

Description

Result of the Fraugster check Contains the overall Fraud score which is an integer between 0 and 99
close

Description

Object containing device fingerprinting details from InAuth
  • SDK Object type
    domain.InAuth
close

Description

The type of device used by the customer. Example values:
  • SMARTPHONE
  • PERSONAL_COMPUTER
  • TABLET
  • WEARABLE_COMPUTER
  • GAME_CONSOLE
  • SMART_TV
  • PDA
  • OTHER
  • UNKNOWN
close

Description

This is the device fingerprint value. Based on the amount of data that the device fingerprint collector script was able to collect, this will be a proxy ID for the device used by the customer.
close

Description

The score calculated on the basis of Anomalies, Velocity, Location, Integrity, List-Based, and Device Reputation. Range of the score is between 0 and 100. A lower value is better.
close

Description

The true IP address as determined by inAuth. This might be different from the IP address that you are seeing on your side due to the proxy piercing technology deployed by inAuth.
close

Description

The country of the customer based on the location of the True IP Address determined by inAuth.
close

Description

This object contains the results of Microsoft Fraud Protection risk assessment. Microsoft collects transaction data points and uses Adaptive AI that continuously learns to protect you against payment fraud, and the device fingerprinting details from the Microsoft Device Fingerprinting service.
  • SDK Object type
    domain.MicrosoftFraudResults
close

Description

Name of the clause within the applied policy that was triggered during the evaluation of this transaction.
close

Description

The country of the customer determined by Microsoft Device Fingerprinting.
close

Description

This is the device fingerprint value. Based on the amount of data that the device fingerprint collector script was able to collect, this will be a proxy ID for the device used by the customer.
close

Description

Result of the Microsoft Fraud Protection check. This contains the normalized fraud score from a scale of 0 to 100. A higher score indicates an increased risk of fraud.
close

Description

Name of the policy that was applied on during the evaluation of this transaction.
close

Description

The true IP address as determined by Microsoft Device Fingerprinting.
close

Description

The type of device used by the customer.
close

Description

Additional response data returned by RetailDecisions
  • SDK Object type
    domain.FraudResultsRetailDecisions
close

Description

Result of the fraud service. Provides additional information about the fraud result
close

Description

Returns the raw score of the neural
close

Description

Result of the fraud service Represent sets of fraud rules returned during the evaluation of the transaction
close

Description

The unique scheme transactionId of the initial transaction that was performed with SCA.
Should be stored by the merchant to allow it to be submitted in future transactions.
close

Description

Indicates if a network token was used during the payment.
close

Description

Payment product identifier
Please see payment products for a full overview of possible values.
close

Description

The unique scheme transactionId of this transaction.
Should be stored by the merchant to allow it to be submitted in future transactions. Use this value in case the initialSchemeTransactionId property is empty.
close

Description

3D Secure results object
  • SDK Object type
    domain.ThreeDSecureResults
close

Description

Identifier of the authenticated transaction at the ACS/Issuer
close

Description

Exemption code from Carte Bancaire (130) (unknown possible values so far -free format)
close

Description

The amount for which this transaction has been authenticated.
  • SDK Object type
    domain.AmountOfMoney
close

Description

Amount in cents and always having 2 decimals
close

Description

Three-letter ISO currency code representing the currency for the amount
close

Description

CAVV or AVV result indicating authentication validation value
close

Description

The 3-D Secure Directory Server transaction ID that is used for the 3D Authentication
close

Description

Indicates Authentication validation results returned after AuthenticationValidation
close

Description

Object containing exemption output
  • SDK Object type
    domain.ExemptionOutput
close

Description

Type of strong customer authentication (SCA) exemption that was raised towards the acquirer for this transaction.
close

Description

The request exemption could not be granted. The reason why is returned in this property.
close

Description

Type of strong customer authentication (SCA) exemption requested by you for this transaction.
close

Description

Global score calculated by the Carte Bancaire (130) Scoring platform. Possible values from 0 to 99
close

Description

Object containing 3-D Secure in-app SDK data
  • SDK Object type
    domain.SdkDataOutput
close

Description

Universally unique transaction identifier assigned by the 3-D Secure SDK to identify this transaction.
close

Description

Object containing data regarding the 3-D Secure authentication
  • SDK Object type
    domain.ThreeDSecureData
close

Description

The ACS Transaction ID for a prior 3-D Secure authenticated transaction (for example, the first recurring transaction that was authenticated with the customer)
close

Description

Method of authentication used for this transaction. Possible values:
  • frictionless = The authentication went without a challenge
  • challenged = Cardholder was challenged
  • avs-verified = The authentication was verified by AVS
  • other = Another issuer method was used to authenticate this transaction
close

Description

Timestamp in UTC (YYYYMMDDHHmm) of the 3-D Secure authentication of this transaction
close

Description

The 3-D Secure version used for the authentication.

This property is used in the communication with the acquirer

close

Description

The 3-D Secure Server transaction ID that is used for the 3-D Secure version 2 Authentication.
close

Description

Transaction ID for the Authentication
close

Description

If a token was used for or created during the payment, then the ID of that token.
close

Description

Object containing the cash payment method details
  • SDK Object type
    domain.CashPaymentMethodSpecificOutput
  • Property is part of a group
    Learn more

    Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call.

    If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.

close

Description

Object containing the results of the fraud screening
  • SDK Object type
    domain.FraudResults
close

Description

Results from the fraud prevention check. Possible values are:
  • accepted - Based on the checks performed the transaction can be accepted
  • challenged - Based on the checks performed the transaction should be manually reviewed
  • denied - Based on the checks performed the transaction should be rejected
  • no-advice - No fraud check was requested/performed
  • error - The fraud check resulted in an error and the fraud check was thus not performed
close

Description

Object containing device fingerprinting details from InAuth
  • SDK Object type
    domain.InAuth
close

Description

The type of device used by the customer. Example values:
  • SMARTPHONE
  • PERSONAL_COMPUTER
  • TABLET
  • WEARABLE_COMPUTER
  • GAME_CONSOLE
  • SMART_TV
  • PDA
  • OTHER
  • UNKNOWN
close

Description

This is the device fingerprint value. Based on the amount of data that the device fingerprint collector script was able to collect, this will be a proxy ID for the device used by the customer.
close

Description

The score calculated on the basis of Anomalies, Velocity, Location, Integrity, List-Based, and Device Reputation. Range of the score is between 0 and 100. A lower value is better.
close

Description

The true IP address as determined by inAuth. This might be different from the IP address that you are seeing on your side due to the proxy piercing technology deployed by inAuth.
close

Description

The country of the customer based on the location of the True IP Address determined by inAuth.
close

Description

This object contains the results of Microsoft Fraud Protection risk assessment. Microsoft collects transaction data points and uses Adaptive AI that continuously learns to protect you against payment fraud, and the device fingerprinting details from the Microsoft Device Fingerprinting service.
  • SDK Object type
    domain.MicrosoftFraudResults
close

Description

Name of the clause within the applied policy that was triggered during the evaluation of this transaction.
close

Description

The country of the customer determined by Microsoft Device Fingerprinting.
close

Description

This is the device fingerprint value. Based on the amount of data that the device fingerprint collector script was able to collect, this will be a proxy ID for the device used by the customer.
close

Description

Result of the Microsoft Fraud Protection check. This contains the normalized fraud score from a scale of 0 to 100. A higher score indicates an increased risk of fraud.
close

Description

Name of the policy that was applied on during the evaluation of this transaction.
close

Description

The true IP address as determined by Microsoft Device Fingerprinting.
close

Description

The type of device used by the customer.
close

Description

Payment product identifier
Please see payment products for a full overview of possible values.
close

Description

Object containing the non SEPA direct debit payment method details
  • SDK Object type
    domain.NonSepaDirectDebitPaymentMethodSpecificOutput
  • Property is part of a group
    Learn more

    Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call.

    If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.

close

Description

Object containing the results of the fraud screening
  • SDK Object type
    domain.FraudResults
close

Description

Results from the fraud prevention check. Possible values are:
  • accepted - Based on the checks performed the transaction can be accepted
  • challenged - Based on the checks performed the transaction should be manually reviewed
  • denied - Based on the checks performed the transaction should be rejected
  • no-advice - No fraud check was requested/performed
  • error - The fraud check resulted in an error and the fraud check was thus not performed
close

Description

Object containing device fingerprinting details from InAuth
  • SDK Object type
    domain.InAuth
close

Description

The type of device used by the customer. Example values:
  • SMARTPHONE
  • PERSONAL_COMPUTER
  • TABLET
  • WEARABLE_COMPUTER
  • GAME_CONSOLE
  • SMART_TV
  • PDA
  • OTHER
  • UNKNOWN
close

Description

This is the device fingerprint value. Based on the amount of data that the device fingerprint collector script was able to collect, this will be a proxy ID for the device used by the customer.
close

Description

The score calculated on the basis of Anomalies, Velocity, Location, Integrity, List-Based, and Device Reputation. Range of the score is between 0 and 100. A lower value is better.
close

Description

The true IP address as determined by inAuth. This might be different from the IP address that you are seeing on your side due to the proxy piercing technology deployed by inAuth.
close

Description

The country of the customer based on the location of the True IP Address determined by inAuth.
close

Description

This object contains the results of Microsoft Fraud Protection risk assessment. Microsoft collects transaction data points and uses Adaptive AI that continuously learns to protect you against payment fraud, and the device fingerprinting details from the Microsoft Device Fingerprinting service.
  • SDK Object type
    domain.MicrosoftFraudResults
close

Description

Name of the clause within the applied policy that was triggered during the evaluation of this transaction.
close

Description

The country of the customer determined by Microsoft Device Fingerprinting.
close

Description

This is the device fingerprint value. Based on the amount of data that the device fingerprint collector script was able to collect, this will be a proxy ID for the device used by the customer.
close

Description

Result of the Microsoft Fraud Protection check. This contains the normalized fraud score from a scale of 0 to 100. A higher score indicates an increased risk of fraud.
close

Description

Name of the policy that was applied on during the evaluation of this transaction.
close

Description

The true IP address as determined by Microsoft Device Fingerprinting.
close

Description

The type of device used by the customer.
close

Description

Payment product identifier
Please see payment products for a full overview of possible values.
close

Description

Object containing the e-invoice payment method details
  • SDK Object type
    domain.EInvoicePaymentMethodSpecificOutput
  • Property is part of a group
    Learn more

    Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call.

    If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.

close

Description

Object containing the results of the fraud screening
  • SDK Object type
    domain.FraudResults
close

Description

Results from the fraud prevention check. Possible values are:
  • accepted - Based on the checks performed the transaction can be accepted
  • challenged - Based on the checks performed the transaction should be manually reviewed
  • denied - Based on the checks performed the transaction should be rejected
  • no-advice - No fraud check was requested/performed
  • error - The fraud check resulted in an error and the fraud check was thus not performed
close

Description

Object containing device fingerprinting details from InAuth
  • SDK Object type
    domain.InAuth
close

Description

The type of device used by the customer. Example values:
  • SMARTPHONE
  • PERSONAL_COMPUTER
  • TABLET
  • WEARABLE_COMPUTER
  • GAME_CONSOLE
  • SMART_TV
  • PDA
  • OTHER
  • UNKNOWN
close

Description

This is the device fingerprint value. Based on the amount of data that the device fingerprint collector script was able to collect, this will be a proxy ID for the device used by the customer.
close

Description

The score calculated on the basis of Anomalies, Velocity, Location, Integrity, List-Based, and Device Reputation. Range of the score is between 0 and 100. A lower value is better.
close

Description

The true IP address as determined by inAuth. This might be different from the IP address that you are seeing on your side due to the proxy piercing technology deployed by inAuth.
close

Description

The country of the customer based on the location of the True IP Address determined by inAuth.
close

Description

This object contains the results of Microsoft Fraud Protection risk assessment. Microsoft collects transaction data points and uses Adaptive AI that continuously learns to protect you against payment fraud, and the device fingerprinting details from the Microsoft Device Fingerprinting service.
  • SDK Object type
    domain.MicrosoftFraudResults
close

Description

Name of the clause within the applied policy that was triggered during the evaluation of this transaction.
close

Description

The country of the customer determined by Microsoft Device Fingerprinting.
close

Description

This is the device fingerprint value. Based on the amount of data that the device fingerprint collector script was able to collect, this will be a proxy ID for the device used by the customer.
close

Description

Result of the Microsoft Fraud Protection check. This contains the normalized fraud score from a scale of 0 to 100. A higher score indicates an increased risk of fraud.
close

Description

Name of the policy that was applied on during the evaluation of this transaction.
close

Description

The true IP address as determined by Microsoft Device Fingerprinting.
close

Description

The type of device used by the customer.
close

Description

AfterPay Installments (payment product 9000) specific details
  • SDK Object type
    domain.EInvoicePaymentProduct9000SpecificOutput
close

Description

The ID of the installment plan used for the payment.
close

Description

Payment product identifier
Please see payment products for a full overview of possible values.
close

Description

Object containing the invoice payment method details
  • SDK Object type
    domain.InvoicePaymentMethodSpecificOutput
  • Property is part of a group
    Learn more

    Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call.

    If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.

close

Description

Object containing the results of the fraud screening
  • SDK Object type
    domain.FraudResults
close

Description

Results from the fraud prevention check. Possible values are:
  • accepted - Based on the checks performed the transaction can be accepted
  • challenged - Based on the checks performed the transaction should be manually reviewed
  • denied - Based on the checks performed the transaction should be rejected
  • no-advice - No fraud check was requested/performed
  • error - The fraud check resulted in an error and the fraud check was thus not performed
close

Description

Object containing device fingerprinting details from InAuth
  • SDK Object type
    domain.InAuth
close

Description

The type of device used by the customer. Example values:
  • SMARTPHONE
  • PERSONAL_COMPUTER
  • TABLET
  • WEARABLE_COMPUTER
  • GAME_CONSOLE
  • SMART_TV
  • PDA
  • OTHER
  • UNKNOWN
close

Description

This is the device fingerprint value. Based on the amount of data that the device fingerprint collector script was able to collect, this will be a proxy ID for the device used by the customer.
close

Description

The score calculated on the basis of Anomalies, Velocity, Location, Integrity, List-Based, and Device Reputation. Range of the score is between 0 and 100. A lower value is better.
close

Description

The true IP address as determined by inAuth. This might be different from the IP address that you are seeing on your side due to the proxy piercing technology deployed by inAuth.
close

Description

The country of the customer based on the location of the True IP Address determined by inAuth.
close

Description

This object contains the results of Microsoft Fraud Protection risk assessment. Microsoft collects transaction data points and uses Adaptive AI that continuously learns to protect you against payment fraud, and the device fingerprinting details from the Microsoft Device Fingerprinting service.
  • SDK Object type
    domain.MicrosoftFraudResults
close

Description

Name of the clause within the applied policy that was triggered during the evaluation of this transaction.
close

Description

The country of the customer determined by Microsoft Device Fingerprinting.
close

Description

This is the device fingerprint value. Based on the amount of data that the device fingerprint collector script was able to collect, this will be a proxy ID for the device used by the customer.
close

Description

Result of the Microsoft Fraud Protection check. This contains the normalized fraud score from a scale of 0 to 100. A higher score indicates an increased risk of fraud.
close

Description

Name of the policy that was applied on during the evaluation of this transaction.
close

Description

The true IP address as determined by Microsoft Device Fingerprinting.
close

Description

The type of device used by the customer.
close

Description

Payment product identifier
Please see payment products for a full overview of possible values.
close

Description

Object containing the mobile payment method details
  • SDK Object type
    domain.MobilePaymentMethodSpecificOutput
  • Property is part of a group
    Learn more

    Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call.

    If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.

close

Description

Card Authorization code as returned by the acquirer
close

Description

Fraud results contained in the CardFraudResults object
  • SDK Object type
    domain.CardFraudResults
close

Description

Result of the Address Verification Service checks. Possible values are:
  • A - Address (Street) matches, Zip does not
  • B - Street address match for international transactions—Postal code not verified due to incompatible formats
  • C - Street address and postal code not verified for international transaction due to incompatible formats
  • D - Street address and postal code match for international transaction, cardholder name is incorrect
  • E - AVS error
  • F - Address does match and five digit ZIP code does match (UK only)
  • G - Address information is unavailable; international transaction; non-AVS participant
  • H - Billing address and postal code match, cardholder name is incorrect (Amex)
  • I - Address information not verified for international transaction
  • K - Cardholder name matches (Amex)
  • L - Cardholder name and postal code match (Amex)
  • M - Cardholder name, street address, and postal code match for international transaction
  • N - No Match on Address (Street) or Zip
  • O - Cardholder name and address match (Amex)
  • P - Postal codes match for international transaction—Street address not verified due to incompatible formats
  • Q - Billing address matches, cardholder is incorrect (Amex)
  • R - Retry, System unavailable or Timed out
  • S - Service not supported by issuer
  • U - Address information is unavailable
  • W - 9 digit Zip matches, Address (Street) does not
  • X - Exact AVS Match
  • Y - Address (Street) and 5 digit Zip match
  • Z - 5 digit Zip matches, Address (Street) does not
  • 0 - No service available
close

Description

Result of the Card Verification Value checks. Possible values are:
  • M - CVV check performed and valid value
  • N - CVV checked and no match
  • P - CVV check not performed, not requested
  • S - Cardholder claims no CVV code on card, issuer states CVV-code should be on card
  • U - Issuer not certified for CVV2
  • Y - Server provider did not respond
  • 0 - No service available
close

Description

Resulting advice of the fraud prevention checks. Possible values are:
  • accepted - Based on the checks performed the transaction can be accepted
  • challenged - Based on the checks performed the transaction should be manually reviewed
  • denied - Based on the checks performed the transaction should be rejected
  • no-advice - No fraud check was requested/performed
  • error - The fraud check resulted an error. Note that the fraud check was thus not performed.
close

Description

Results of Fraugster fraud prevention check. Fraugster collects transaction data points such as name, email address, billing, etc. to analyze whether or not the transaction is fraudulent.
  • SDK Object type
    domain.FraugsterResults
close

Description

Result of the Fraugster check Contains the investigation points used during the evaluation
close

Description

Result of the Fraugster check Contains the overall Fraud score which is an integer between 0 and 99
close

Description

Object containing device fingerprinting details from InAuth
  • SDK Object type
    domain.InAuth
close

Description

The type of device used by the customer. Example values:
  • SMARTPHONE
  • PERSONAL_COMPUTER
  • TABLET
  • WEARABLE_COMPUTER
  • GAME_CONSOLE
  • SMART_TV
  • PDA
  • OTHER
  • UNKNOWN
close

Description

This is the device fingerprint value. Based on the amount of data that the device fingerprint collector script was able to collect, this will be a proxy ID for the device used by the customer.
close

Description

The score calculated on the basis of Anomalies, Velocity, Location, Integrity, List-Based, and Device Reputation. Range of the score is between 0 and 100. A lower value is better.
close

Description

The true IP address as determined by inAuth. This might be different from the IP address that you are seeing on your side due to the proxy piercing technology deployed by inAuth.
close

Description

The country of the customer based on the location of the True IP Address determined by inAuth.
close

Description

This object contains the results of Microsoft Fraud Protection risk assessment. Microsoft collects transaction data points and uses Adaptive AI that continuously learns to protect you against payment fraud, and the device fingerprinting details from the Microsoft Device Fingerprinting service.
  • SDK Object type
    domain.MicrosoftFraudResults
close

Description

Name of the clause within the applied policy that was triggered during the evaluation of this transaction.
close

Description

The country of the customer determined by Microsoft Device Fingerprinting.
close

Description

This is the device fingerprint value. Based on the amount of data that the device fingerprint collector script was able to collect, this will be a proxy ID for the device used by the customer.
close

Description

Result of the Microsoft Fraud Protection check. This contains the normalized fraud score from a scale of 0 to 100. A higher score indicates an increased risk of fraud.
close

Description

Name of the policy that was applied on during the evaluation of this transaction.
close

Description

The true IP address as determined by Microsoft Device Fingerprinting.
close

Description

The type of device used by the customer.
close

Description

Additional response data returned by RetailDecisions
  • SDK Object type
    domain.FraudResultsRetailDecisions
close

Description

Result of the fraud service. Provides additional information about the fraud result
close

Description

Returns the raw score of the neural
close

Description

Result of the fraud service Represent sets of fraud rules returned during the evaluation of the transaction
close

Description

The network that was used for the refund
close

Description

Object containing payment details
  • SDK Object type
    domain.MobilePaymentData
close

Description

The obfuscated DPAN. Only the last four digits are visible.
close

Description

Expiry date of the tokenized card
Format: MMYY
close

Description

Payment product identifier
Please see payment products for a full overview of possible values.
close

Description

3D Secure results object
  • SDK Object type
    domain.ThreeDSecureResults
close

Description

Identifier of the authenticated transaction at the ACS/Issuer
close

Description

Exemption code from Carte Bancaire (130) (unknown possible values so far -free format)
close

Description

The amount for which this transaction has been authenticated.
  • SDK Object type
    domain.AmountOfMoney
close

Description

Amount in cents and always having 2 decimals
close

Description

Three-letter ISO currency code representing the currency for the amount
close

Description

CAVV or AVV result indicating authentication validation value
close

Description

The 3-D Secure Directory Server transaction ID that is used for the 3D Authentication
close

Description

Indicates Authentication validation results returned after AuthenticationValidation
close

Description

Object containing exemption output
  • SDK Object type
    domain.ExemptionOutput
close

Description

Type of strong customer authentication (SCA) exemption that was raised towards the acquirer for this transaction.
close

Description

The request exemption could not be granted. The reason why is returned in this property.
close

Description

Type of strong customer authentication (SCA) exemption requested by you for this transaction.
close

Description

Global score calculated by the Carte Bancaire (130) Scoring platform. Possible values from 0 to 99
close

Description

Object containing 3-D Secure in-app SDK data
  • SDK Object type
    domain.SdkDataOutput
close

Description

Universally unique transaction identifier assigned by the 3-D Secure SDK to identify this transaction.
close

Description

Object containing data regarding the 3-D Secure authentication
  • SDK Object type
    domain.ThreeDSecureData
close

Description

The ACS Transaction ID for a prior 3-D Secure authenticated transaction (for example, the first recurring transaction that was authenticated with the customer)
close

Description

Method of authentication used for this transaction. Possible values:
  • frictionless = The authentication went without a challenge
  • challenged = Cardholder was challenged
  • avs-verified = The authentication was verified by AVS
  • other = Another issuer method was used to authenticate this transaction
close

Description

Timestamp in UTC (YYYYMMDDHHmm) of the 3-D Secure authentication of this transaction
close

Description

The 3-D Secure version used for the authentication.

This property is used in the communication with the acquirer

close

Description

The 3-D Secure Server transaction ID that is used for the 3-D Secure version 2 Authentication.
close

Description

Transaction ID for the Authentication
close

Description

Object containing the redirect payment product details
  • SDK Object type
    domain.RedirectPaymentMethodSpecificOutput
  • Property is part of a group
    Learn more

    Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call.

    If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.

close

Description

Object that holds the Basic Bank Account Number (BBAN) data
  • SDK Object type
    domain.BankAccountBban
close

Description

Name of the account holder
close

Description

Bank account number
close

Description

Bank code
close

Description

Name of the bank
close

Description

Branch code
close

Description

Bank check digit
close

Description

ISO 3166-1 alpha-2 country code of the country where the bank account is held For UK payouts this value is automatically set to GB as only payouts to UK accounts are supported.
close

Description

Object containing account holder name and IBAN information
  • SDK Object type
    domain.BankAccountIban
close

Description

Name in which the account is held.
close

Description

The IBAN is the International Bank Account Number. It is an internationally agreed format for the BBAN and includes the ISO country code and two check digits.
close

Description

The BIC is the Business Identifier Code, also known as SWIFT or Bank Identifier code. It is a code with an internationally agreed format to Identify a specific bank or even branch. The BIC contains 8 or 11 positions: the first 4 contain the bank code, followed by the country code and location code.
close

Description

Object containing the results of the fraud screening
  • SDK Object type
    domain.FraudResults
close

Description

Results from the fraud prevention check. Possible values are:
  • accepted - Based on the checks performed the transaction can be accepted
  • challenged - Based on the checks performed the transaction should be manually reviewed
  • denied - Based on the checks performed the transaction should be rejected
  • no-advice - No fraud check was requested/performed
  • error - The fraud check resulted in an error and the fraud check was thus not performed
close

Description

Object containing device fingerprinting details from InAuth
  • SDK Object type
    domain.InAuth
close

Description

The type of device used by the customer. Example values:
  • SMARTPHONE
  • PERSONAL_COMPUTER
  • TABLET
  • WEARABLE_COMPUTER
  • GAME_CONSOLE
  • SMART_TV
  • PDA
  • OTHER
  • UNKNOWN
close

Description

This is the device fingerprint value. Based on the amount of data that the device fingerprint collector script was able to collect, this will be a proxy ID for the device used by the customer.
close

Description

The score calculated on the basis of Anomalies, Velocity, Location, Integrity, List-Based, and Device Reputation. Range of the score is between 0 and 100. A lower value is better.
close

Description

The true IP address as determined by inAuth. This might be different from the IP address that you are seeing on your side due to the proxy piercing technology deployed by inAuth.
close

Description

The country of the customer based on the location of the True IP Address determined by inAuth.
close

Description

This object contains the results of Microsoft Fraud Protection risk assessment. Microsoft collects transaction data points and uses Adaptive AI that continuously learns to protect you against payment fraud, and the device fingerprinting details from the Microsoft Device Fingerprinting service.
  • SDK Object type
    domain.MicrosoftFraudResults
close

Description

Name of the clause within the applied policy that was triggered during the evaluation of this transaction.
close

Description

The country of the customer determined by Microsoft Device Fingerprinting.
close

Description

This is the device fingerprint value. Based on the amount of data that the device fingerprint collector script was able to collect, this will be a proxy ID for the device used by the customer.
close

Description

Result of the Microsoft Fraud Protection check. This contains the normalized fraud score from a scale of 0 to 100. A higher score indicates an increased risk of fraud.
close

Description

Name of the policy that was applied on during the evaluation of this transaction.
close

Description

The true IP address as determined by Microsoft Device Fingerprinting.
close

Description

The type of device used by the customer.
close

Description

PostFinance Card (payment product 3201) specific details
  • SDK Object type
    domain.PaymentProduct3201SpecificOutput
  • Property is part of a group
    Learn more

    Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call.

    If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.

close

Description

Object containing card details
  • SDK Object type
    domain.CardEssentials
close

Description

The complete credit/debit card number
close

Description

The card holder's name on the card.
close

Description

Expiry date of the card
Format: MMYY
close

Description

Trustly (payment product 806) specific details
  • SDK Object type
    domain.PaymentProduct806SpecificOutput
  • Property is part of a group
    Learn more

    Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call.

    If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.

close

Description

Object containing the billing address details of the customer
  • SDK Object type
    domain.Address
close

Description

Additional address information. The additionalInfo is truncated after 10 characters for payments, refunds or payouts that are processed by the WL Online Payment Acceptance platform
close

Description

City
Note: For payments with product 1503 the maximum length is not 40 but 20.
close

Description

ISO 3166-1 alpha-2 country code
close

Description

House number. The houseNumber is truncated after 10 characters for payments, refunds or payouts that are processed by the WL Online Payment Acceptance platform
close

Description

Full name of the state or province
close

Description

ISO 3166-2 alpha-3 state code
Notes:
  • The maximum length for 3-D Secure version 2 is AN3 for payments that are processed by the GlobalCollect platform
  • The maximum length for paymentProductId 1503 (Boleto) is AN2 for payments that are processed by the GlobalCollect platform
  • The maximum length is 3 for payments that are processed by the WL Online Payment Acceptance platform
close

Description

Streetname
close

Description

Zip code
Note: For payments with product 1503 the maximum length is not 10 but 8.
close

Description

Object containing the account details
  • SDK Object type
    domain.TrustlyBankAccount
close

Description

The last digits of the account number
close

Description

The name of the bank
close

Description

The country of the clearing house
close

Description

The ID number of the account holder
close

Description

Sofort (payment product 836) specific details
  • SDK Object type
    domain.PaymentProduct836SpecificOutput
  • Property is part of a group
    Learn more

    Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call.

    If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.

close

Description

Indicates if SofortBank could estabilish if the transaction could successfully be processed.
  • 0 - You should wait for the transaction to be reported as paid before shipping any goods.
  • 1 - You can ship the goods. In case the transaction is not reported as paid you can initiate a claims process with SofortBank.
close

Description

PayPal (payment product 840) specific details
  • SDK Object type
    domain.PaymentProduct840SpecificOutput
  • Property is part of a group
    Learn more

    Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call.

    If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.

close

Description

Object containing the billing address details of the customer
  • SDK Object type
    domain.Address
close

Description

Additional address information. The additionalInfo is truncated after 10 characters for payments, refunds or payouts that are processed by the WL Online Payment Acceptance platform
close

Description

City
Note: For payments with product 1503 the maximum length is not 40 but 20.
close

Description

ISO 3166-1 alpha-2 country code
close

Description

House number. The houseNumber is truncated after 10 characters for payments, refunds or payouts that are processed by the WL Online Payment Acceptance platform
close

Description

Full name of the state or province
close

Description

ISO 3166-2 alpha-3 state code
Notes:
  • The maximum length for 3-D Secure version 2 is AN3 for payments that are processed by the GlobalCollect platform
  • The maximum length for paymentProductId 1503 (Boleto) is AN2 for payments that are processed by the GlobalCollect platform
  • The maximum length is 3 for payments that are processed by the WL Online Payment Acceptance platform
close

Description

Streetname
close

Description

Zip code
Note: For payments with product 1503 the maximum length is not 10 but 8.
close

Description

Object containing the details of the PayPal account
  • SDK Object type
    domain.PaymentProduct840CustomerAccount
close

Description

Username with which the PayPal account holder has registered at PayPal
close

Description

Identification of the PayPal recurring billing agreement
close

Description

Name of the company in case the PayPal account is owned by a business
close

Description

The phone number of the PayPal account holder
close

Description

Country where the PayPal account is located
close

Description

Status of the PayPal account.
Possible values are:
  • verified - PayPal has verified the funding means for this account
  • unverified - PayPal has not verified the funding means for this account
close

Description

Status of the customer's shipping address as registered by PayPal
Possible values are:
  • none - Status is unknown at PayPal
  • confirmed - The address has been confirmed
  • unconfirmed - The address has not been confirmed
close

Description

First name of the PayPal account holder
close

Description

The unique identifier of a PayPal account and will never change in the life cycle of a PayPal account
close

Description

Surname of the PayPal account holder
close

Description

Object containing the address details of the customer
  • SDK Object type
    domain.Address
close

Description

Additional address information. The additionalInfo is truncated after 10 characters for payments, refunds or payouts that are processed by the WL Online Payment Acceptance platform
close

Description

City
Note: For payments with product 1503 the maximum length is not 40 but 20.
close

Description

ISO 3166-1 alpha-2 country code
close

Description

House number. The houseNumber is truncated after 10 characters for payments, refunds or payouts that are processed by the WL Online Payment Acceptance platform
close

Description

Full name of the state or province
close

Description

ISO 3166-2 alpha-3 state code
Notes:
  • The maximum length for 3-D Secure version 2 is AN3 for payments that are processed by the GlobalCollect platform
  • The maximum length for paymentProductId 1503 (Boleto) is AN2 for payments that are processed by the GlobalCollect platform
  • The maximum length is 3 for payments that are processed by the WL Online Payment Acceptance platform
close

Description

Streetname
close

Description

Zip code
Note: For payments with product 1503 the maximum length is not 10 but 8.
close

Description

Protection Eligibility data of the PayPal customer
  • SDK Object type
    domain.ProtectionEligibility
close

Description

Possible values:
  • Eligible
  • PartiallyEligible
  • Ineligible
close

Description

Possible values:
  • ItemNotReceivedEligible
  • UnauthorizedPaymentEligible
  • Ineligible
close

Description

Payment product identifier
Please see payment products for a full overview of possible values.
close

Description

ID of the token. This property is populated when the payment was done with a token or when the payment was tokenized.
close

Description

Object containing the SEPA direct debit details
  • SDK Object type
    domain.SepaDirectDebitPaymentMethodSpecificOutput
  • Property is part of a group
    Learn more

    Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call.

    If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.

close

Description

Object containing the results of the fraud screening
  • SDK Object type
    domain.FraudResults
close

Description

Results from the fraud prevention check. Possible values are:
  • accepted - Based on the checks performed the transaction can be accepted
  • challenged - Based on the checks performed the transaction should be manually reviewed
  • denied - Based on the checks performed the transaction should be rejected
  • no-advice - No fraud check was requested/performed
  • error - The fraud check resulted in an error and the fraud check was thus not performed
close

Description

Object containing device fingerprinting details from InAuth
  • SDK Object type
    domain.InAuth
close

Description

The type of device used by the customer. Example values:
  • SMARTPHONE
  • PERSONAL_COMPUTER
  • TABLET
  • WEARABLE_COMPUTER
  • GAME_CONSOLE
  • SMART_TV
  • PDA
  • OTHER
  • UNKNOWN
close

Description

This is the device fingerprint value. Based on the amount of data that the device fingerprint collector script was able to collect, this will be a proxy ID for the device used by the customer.
close

Description

The score calculated on the basis of Anomalies, Velocity, Location, Integrity, List-Based, and Device Reputation. Range of the score is between 0 and 100. A lower value is better.
close

Description

The true IP address as determined by inAuth. This might be different from the IP address that you are seeing on your side due to the proxy piercing technology deployed by inAuth.
close

Description

The country of the customer based on the location of the True IP Address determined by inAuth.
close

Description

This object contains the results of Microsoft Fraud Protection risk assessment. Microsoft collects transaction data points and uses Adaptive AI that continuously learns to protect you against payment fraud, and the device fingerprinting details from the Microsoft Device Fingerprinting service.
  • SDK Object type
    domain.MicrosoftFraudResults
close

Description

Name of the clause within the applied policy that was triggered during the evaluation of this transaction.
close

Description

The country of the customer determined by Microsoft Device Fingerprinting.
close

Description

This is the device fingerprint value. Based on the amount of data that the device fingerprint collector script was able to collect, this will be a proxy ID for the device used by the customer.
close

Description

Result of the Microsoft Fraud Protection check. This contains the normalized fraud score from a scale of 0 to 100. A higher score indicates an increased risk of fraud.
close

Description

Name of the policy that was applied on during the evaluation of this transaction.
close

Description

The true IP address as determined by Microsoft Device Fingerprinting.
close

Description

The type of device used by the customer.
close

Description

Output that is SEPA Direct Debit specific (i.e. the used mandate)
  • SDK Object type
    domain.PaymentProduct771SpecificOutput
close

Description

Unique reference to a Mandate
close

Description

Payment product identifier
Please see payment products for a full overview of possible values.
close

Description

ID of the token. This property is populated for the GlobalCollect payment platform when the payment was done with a token or when the payment was tokenized.
close

Description

Payment method identifier used by the our payment engine with the following possible values:
  • bankRefund
  • bankTransfer
  • card
  • cash
  • directDebit
  • eInvoice
  • invoice
  • redirect
close

Description

Object that holds all reference properties that are linked to this transaction
  • SDK Object type
    domain.PaymentReferences
close

Description

Your order ID for this transaction that is also returned in our report files
close

Description

Your unique reference of the transaction that is also returned in our report files. This is almost always used for your reconciliation of our report files.
close

Description

Payment Reference generated by WebCollect
close

Description

Provides an additional means of reconciliation for Gateway merchants
close

Description

Provides an additional means of reconciliation, this is the MerchantId used at the provider
close

Description

Provides an additional means of reconciliation for Gateway merchants
close

Description

When you did not supply a merchantReference for your payment, you need to fill this property with the reference of the original payment when you want to refund it
close

Description

The reason description given for the reversedAmount property.
close

Description

Current high-level status of the payment in a human-readable form. Possible values are :
  • ACCOUNT_VERIFIED - The account has been verified using a validation services like 0$ auth
  • CREATED - The transaction has been created. This is the initial state once a new payment is created.
  • REDIRECTED - The customer has been redirected to a 3rd party to complete the authentication/payment
  • PENDING_PAYMENT - Instructions have been provided and we are now waiting for the money to come in
  • PENDING_FRAUD_APPROVAL - The transaction has been marked for manual review after an automatic fraud screening
  • PENDING_APPROVAL - The transaction is awaiting approval from you to proceed with the capturing of the funds
  • PENDING_COMPLETION - The transaction needs to be completed.
  • PENDING_CAPTURE - The transaction is waiting for you to request one or more captures of the funds.
  • REJECTED - The transaction has been rejected
  • AUTHORIZATION_REQUESTED - we have requested an authorization against an asynchronous system and is awaiting its response
  • CAPTURE_REQUESTED - The transaction is in the queue to be captured
  • CAPTURED - The transaction has been captured and we have received online confirmation
  • PAID - We have matched the incoming funds to the transaction
  • CANCELLED - You have cancelled the transaction
  • REJECTED_CAPTURE - We or one of our downstream acquirers/providers have rejected the capture request
  • REVERSED - The transaction has been reversed
  • CHARGEBACK_NOTIFICATION - We have received a notification of chargeback and this status informs you that your account will be debited for a particular transaction
  • CHARGEBACKED - The transaction has been chargebacked
  • REFUNDED - The transaction has been refunded

Please see Statuses for a full overview of possible values.
close

Description

This object has the numeric representation of the current payment status, timestamp of last status change and performable action on the current payment resource. In case of failed payments and negative scenarios, detailed error information is listed.
  • SDK Object type
    domain.PaymentStatusOutput
close

Description

Custom object contains the set of errors
close

Description

Contains detailed information on one single error.
  • SDK Object type
    domain.APIError
close

Description

Category the error belongs to. The category should give an indication of the type of error you are dealing with. Possible values:
  • CONNECT_PLATFORM_ERROR - indicating that a functional error has occurred in the Connect platform.
  • PAYMENT_PLATFORM_ERROR - indicating that a functional error has occurred in the Payment platform.
  • IO_ERROR - indicating that a technical error has occurred within the Connect platform or between Connect and any of the payment platforms or third party systems.
close

Description

Error code
close

Description

HTTP status code for this error that can be used to determine the type of error
close

Description

ID of the error. This is a short human-readable message that briefly describes the error.
close

Description

Human-readable error message that is not meant to be relayed to customer as it might tip off people who are trying to commit fraud
close

Description

Returned only if the error relates to a value that was missing or incorrect.
Contains a location path to the value as a JSonata query.
Some common examples:
  • a.b selects the value of property b of root property a,
  • a[1] selects the first element of the array in root property a,
  • a[b='some value'] selects all elements of the array in root property a that have a property b with value 'some value'.
close

Description

ID of the request that can be used for debugging purposes
close

Description

Indicates if the transaction has been authorized
  • true
  • false
close

Description

Flag indicating if the payment can be cancelled
  • true
  • false
close

Description

Flag indicating if the payment can be refunded
  • true
  • false
close

Description

Flag indicating whether a rejected payment may be retried by the merchant without incurring a fee
  • true
  • false
close

Description

This is the raw response returned by the acquirer. This property contains unprocessed data directly returned by the acquirer. It's recommended for data analysis only due to its dynamic nature, which may undergo future changes.
close
  • SDK Object type
    domain.KeyValuePair
close

Description

Name of the key or property
close

Description

Value of the key or property
close

Description

Highlevel status of the payment, payout or refund with the following possible values:
  • CREATED - The transaction has been created. This is the initial state once a new payment, payout or refund is created. This category groups the following statuses:
    • CREATED
  • PENDING_PAYMENT: The payment is waiting on customer action. This category groups the following statuses:
    • PENDING_PAYMENT
    • REDIRECTED
  • ACCOUNT_VERIFIED: The account has been verified. This category groups the following statuses:
    • ACCOUNT_VERIFIED
  • PENDING_MERCHANT: The transaction is awaiting approval to proceed with the payment, payout or refund. This category groups the following statuses:
    • PENDING_APPROVAL
    • PENDING_COMPLETION
    • PENDING_CAPTURE
    • PENDING_FRAUD_APPROVAL
  • PENDING_CONNECT_OR_3RD_PARTY: The transaction is in the queue to be processed. This category groups the following statuses:
    • AUTHORIZATION_REQUESTED
    • CAPTURE_REQUESTED
    • PAYOUT_REQUESTED
    • REFUND_REQUESTED
  • COMPLETED: The transaction has completed. This category groups the following statuses:
    • CAPTURED
    • PAID
    • ACCOUNT_CREDITED
    • CHARGEBACK_NOTIFICATION
  • REVERSED: The transaction has been reversed. This category groups the following statuses:
    • CHARGEBACKED
    • REVERSED
  • REFUNDED: The transaction has been refunded. This category groups the following statuses:
    • REFUNDED
  • UNSUCCESSFUL: The transaction has been rejected or is in such a state that it will never become successful. This category groups the following statuses:
    • CANCELLED
    • REJECTED
    • REJECTED_CAPTURE
    • REJECTED_CREDIT

Please see Statuses for a full overview of possible values.
close

Description

Numeric status code of the legacy API. It is returned to ease the migration from the legacy APIs to Worldline Connect. You should not write new business logic based on this property as it will be deprecated in a future version of the API. The value can also be found in the GlobalCollect Payment Console, in the Ogone BackOffice and in report files.
close

Description

Date and time of payment
Format: YYYYMMDDHH24MISS
close

Description

The 3D Secure status, with the following possible values:
  • ENROLLED: the card is enrolled for 3D Secure authentication. The customer can be redirected to a 3D Secure access control server (ACS)
  • NOT_ENROLLED: the card is not enrolled for 3D Secure authentication
  • INVALID_PARES_OR_NOT_COMPLETED: the PARes is invalid, or the customer did not complete the 3D Secure authentication
  • AUTHENTICATED: the customer has passed the 3D Secure authentication
  • NOT_AUTHENTICATED: the customer failed the 3D Secure authentication
  • NOT_PARTICIPATING: the cardholder has not set up their card for 2-step 3D Secure.
Note that this status will only be set for payments that make use of 2-step 3D Secure.
close

Description

Object containing the created references
  • SDK Object type
    domain.PaymentCreationReferences
close

Description

The additional reference identifier for this transaction. Data in this property will also be returned in our report files, allowing you to reconcile them.
close

Description

The external reference identifier for this transaction. Data in this property will also be returned in our report files, allowing you to reconcile them.
close
Deprecated: Use payment.statusOutput.statusCategory instead

Description

Highlevel indication of the payment status with the following possible values:
  • REJECTED - The payment has been rejected or is in such a state that it will never become successful. This category groups the following statuses:
    • CREATED
    • REJECTED
    • REJECTED CAPTURE
    • REJECTED REFUND
    • REJECTED PAYOUT
    • CANCELLED
  • SUCCESSFUL - The payment was not (yet) rejected. Use the payment statuses to determine if it was completed, see Statuses. This category groups the following statuses:
    • PENDING PAYMENT
    • ACCOUNT VERIFIED
    • PENDING FRAUD APPROVAL
    • PENDING APPROVAL
    • AUTHORIZATION REQUESTED
    • CAPTURE REQUESTED
    • REFUND REQUESTED
    • PAYOUT REQUESTED
    • CAPTURED
    • PAID
    • ACCOUNT CREDITED
    • REVERSED
    • CHARGEBACK_NOTIFICATION
    • CHARGEBACKED
    • REFUNDED
  • STATUS_UNKNOWN - The status of the payment is unknown at this moment. This category groups the following statuses:
    • REDIRECTED

Please see Statuses for a full overview of possible values.
close

Description

If the payment was attempted to be tokenized, indicates if tokenization was successful or not.
close

Description

This property contains the tokens that are associated with the hosted checkout session/customer. You can use the tokens listed in this list for a future checkout of the same customer.
close

Description

This is the status of the hosted checkout. Possible values are:
  • IN_PROGRESS - The checkout is still in progress and has not finished yet
  • PAYMENT_CREATED - A payment has been created
  • CANCELLED_BY_CONSUMER - If a customer cancels the payment on the payment product detail page of the MyCheckout hosted payment pages, the status will change to IN_PROGRESS. Since we understand you want to be aware of a customer cancelling the payment on the page we host for you, you can choose to receive the status CANCELLED_BY_CONSUMER instead of the status IN_PROGRESS. In order to receive the status CANCELLED_BY_CONSUMER, you need to have the returnCancelState flag enabled in the Create hosted checkout call.
  • CLIENT_NOT_ELIGIBLE_FOR_SELECTED_PAYMENT_PRODUCT - With some payment products it might occur that the device of the user is not capable to complete the payment. If the Hosted Checkout Session was restricted to a single project that is not compatible to the user's device you will receive this Hosted Checkout status. This scenario applies to: Google Pay (Payment Product ID: 320).

Please see Statuses for a full overview of possible values.

Response example

SDK: Go

This scenario you will probably use the most

  • {
        "createdPaymentOutput" : {
            "payment" : {
                "id" : "000000891566072501680000200001",
                "hostedCheckoutSpecificOutput" : {
                    "hostedCheckoutId" : "dbcb004a-1eda-4e83-aa47-1656bcdc3e36",
                    "variant" : "100"
                },
                "paymentOutput" : {
                    "amountOfMoney" : {
                        "amount" : 2345,
                        "currencyCode" : "USD"
                    },
                    "references" : {
                        "paymentReference" : "0"
                    },
                    "paymentMethod" : "card",
                    "cardPaymentMethodSpecificOutput" : {
                        "paymentProductId" : 1,
                        "authorisationCode" : "123456",
                        "card" : {
                            "cardNumber" : "************7977",
                            "expiryDate" : "1299"
                        },
                        "fraudResults" : {
                            "avsResult" : "0",
                            "cvvResult" : "M",
                            "fraudServiceResult" : "no-advice"
                        },
                        "threeDSecureResults" : {
                            "authenticationAmount" : {
                                "currencyCode" : "EUR",
                                "amount" : 2345
                            }
                        }
                    }
                },
                "status" : "PENDING_APPROVAL",
                "statusOutput" : {
                    "isCancellable" : true,
                    "statusCode" : 600,
                    "statusCodeChangeDateTime" : "20140717145840",
                    "isAuthorized" : true
                }
            },
            "paymentCreationReferences" : {
                "additionalReference" : "00000089156607250168",
                "externalReference" : "000000891566072501680000200001"
            },
            "tokens" : ""
        },
        "status" : "PAYMENT_CREATED"
    }
    

Response 400 - Bad requestdomain.ErrorResponse

Properties
Property Type Required Details
close

Description

Unique reference, for debugging purposes, of this error response
close

Description

List of one or more errors
close

Description

Contains detailed information on one single error.
  • SDK Object type
    domain.APIError
close

Description

Category the error belongs to. The category should give an indication of the type of error you are dealing with. Possible values:
  • CONNECT_PLATFORM_ERROR - indicating that a functional error has occurred in the Connect platform.
  • PAYMENT_PLATFORM_ERROR - indicating that a functional error has occurred in the Payment platform.
  • IO_ERROR - indicating that a technical error has occurred within the Connect platform or between Connect and any of the payment platforms or third party systems.
close

Description

Error code
close

Description

HTTP status code for this error that can be used to determine the type of error
close

Description

ID of the error. This is a short human-readable message that briefly describes the error.
close

Description

Human-readable error message that is not meant to be relayed to customer as it might tip off people who are trying to commit fraud
close

Description

Returned only if the error relates to a value that was missing or incorrect.
Contains a location path to the value as a JSonata query.
Some common examples:
  • a.b selects the value of property b of root property a,
  • a[1] selects the first element of the array in root property a,
  • a[b='some value'] selects all elements of the array in root property a that have a property b with value 'some value'.
close

Description

ID of the request that can be used for debugging purposes

Response example

SDK: Go

This scenario you will probably use the most

  • {
        "errorId" : "15eabcd5-30b3-479b-ae03-67bb351c07e6-00000092",
        "errors" : [
            {
                "code" : "20000000",
                "propertyName" : "bankAccountBban.accountNumber",
                "message" : "PARAMETER_NOT_FOUND_IN_REQUEST"
            }
        ]
    }