Create token

POST https://{domainname}/v1/{merchantId}/tokens

Tokens

Using our tokenization service you can tokenize re-usable payment data like card data, bank account data including Direct Debit Mandates and PayPal BillingAgreementIDs. The main purpose for tokens is re-use of payment details. The additional benefit is that you do not need to store any sensitive payment details on your server, while still having the benefit to be able to re-use them. This allows you to process recurring card transactions without actually having access to the real card data.

Tokens can be used for two types of transactions:

Recurring: Automatically charging your consumer in a regular, e.g. monthly, time frame;
One-off: Charge the consumer without the consumer having to re-enter all of their payment details.

The second scenario can be used to facilitate a one-click checkout solution, that would still allow the consumer to enter only their CVV value for a card transaction. CVV values can't be tokenized as they are not allowed to be stored at all.

Besides the re-use of payment data, tokens have one other major use-case: Direct Debit Mandates. Especially SEPA Direct Debit transactions require that the mandate for the transactions is managed through a token with an associated mandate. Mandates are created in one go with the token, but can have a state that requires that they are approved before they can be used. As the mandate process is in most cases an offline process the approval will allow you to set the location and date where and when the mandate was signed by the consumer. Without an approved SEPA mandate you will not be able to process any payments regarding this mandate.

Request

Use this call to tokenize payment details. Note that only basic input validation is performed as no actual transaction is processed. We do not check the validity of the payment details with any of its acquirers or third party payment processors. If you want to only tokenize payment details that have been successfully processed it is advised to create tokens using the tokenize action on successful payments. The payload can, next to the paymentProductID contain one of the following types of objects to tokenize:

card data
SEPA Direct Debit data (including mandate information)
Non SEPA Direct Debit data
eWallet data

Tokenization using Encrypted Customer Input

Note: this applies only for sending encrypted customer card data, and cannot be used to tokenize (SEPA) Direct Debit or eWallet data

The mandatory and optional fields are the same as for the card group when not using the encrypted customer input.

Please ensure that the following 3 mandatory fields are present:

cardNumber
expiryDate
countryCode

The following optional fields may also be submitted:

cardholderName
additionalInfo
city
houseNumber
stateCode
street
zip
firstName
surname

Payloaddomain.CreateTokenRequest

Property	Type	Required	Details
Properties Expand all properties Hide deprecated properties
Group card	object	no	read close
close Description Object containing card details SDK Object type domain.TokenCard Property is part of a group Learn more Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call. If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.
alias	string (100)	no	read close
close Description An alias for the token. This can be used to visually represent the token. If no alias is given in Create token calls, a payment product specific default is used, e.g. the obfuscated card number for card payment products. Do not include any unobfuscated sensitive data in the alias.
customer	object	depends	read close
close Description Object containing the details of the customer Depends on: Required for requests that will be processed by the GlobalCollect Payment platform. SDK Object type domain.CustomerToken
billingAddress	object	no	read close
close Description Object containing the billing address details SDK Object type domain.Address
additionalInfo	string (50)	no	read close
close Description Additional address information. The additionalInfo is truncated after 10 characters for payments, refunds or payouts that are processed by the WL Online Payment Acceptance platform
city	string	depends	read close
close Description City Note: For payments with product 1503 the maximum length is not 40 but 20. Depends on: Required for Invoice payments (201) Required for Direct Debit UK (705) except when a token has been included in the request that includes this value. Required for the creation of a Payout. Required for payments with product 9000 (AfterPay Installments) or 9001 (AfterPay Invoice). Required for payments with product 6101 (Banco do Brasil), 6102 (Itaú), 6103 (Banrisul), 6104 (Bradesco), 6105 (Pix) or 6107 (PicPay). Required when address is included in Seller.
countryCode	string (2)	depends	read close
close Description ISO 3166-1 alpha-2 country code Depends on: Required for create token requests that will be processed by the GlobalCollect Payment platform.
houseNumber	string (15)	depends	read close
close Description House number. The houseNumber is truncated after 10 characters for payments, refunds or payouts that are processed by the WL Online Payment Acceptance platform Depends on: Required when address is included in Seller. Required for 6101 (Banco do Brasil), 6102 (Itaú), 6103 (Banrisul), 6104 (Bradesco), 6105 (Pix) and 6107 (PicPay).
state	string (35)	no	read close
close Description Full name of the state or province
stateCode	string	depends	read close
close Description ISO 3166-2 alpha-3 state code Notes: The maximum length for 3-D Secure version 2 is AN3 for payments that are processed by the GlobalCollect platform The maximum length for paymentProductId 1503 (Boleto) is AN2 for payments that are processed by the GlobalCollect platform The maximum length is 3 for payments that are processed by the WL Online Payment Acceptance platform Depends on: Required for payments with paymentProductId 1503 (Boleto), 6101 (Banco do Brasil), 6102 (Itaú), 6103 (Banrisul), 6104 (Bradesco), 6105 (Pix) or 6107 (PicPay).
street	string (50)	depends	read close
close Description Streetname Depends on: Required for Invoice payments (201) Required for Direct Debit UK (705), except when a token has been included in the request that includes this value. Required for the creation of a Payout. Required for payments with product 9000 (AfterPay Installments) or 9001 (AfterPay Invoice). Required for payments with product 6101 (Banco do Brasil), 6102 (Itaú), 6103 (Banrisul), 6104 (Bradesco), 6105 (Pix) or 6107 (PicPay). Required when address is included in Seller.
zip	string	depends	read close
close Description Zip code Note: For payments with product 1503 the maximum length is not 10 but 8. Depends on: Required for Direct Debit UK (705) except when a token has been included in the request that includes this value. Required for payments with product 9000 (AfterPay Installments) or 9001 (AfterPay Invoice). Required for payments with product 6101 (Banco do Brazil), 6102 (Itaú), 6103 (Banrisul), 6104 (Bradesco), 6105 (Pix) or 6107 (PicPay).
companyInformation	object	no	read close
close Description Object containing company information SDK Object type domain.CompanyInformation
name	string (40)	depends depends no no no	read close
close Description Name of company, as a customer Depends on: Required for payments when the property order.customer.fiscalNumber is set to: Argentina: Company (CUIT) - 11 digits. Brazil: Company (CNPJ) - 14 digits. Depends on: Required by the WOPA platform for payments when the property order.customer.fiscalNumber is set to: Argentina: Company (CUIT) - 11 digits. Brazil: Company (CNPJ) - 14 digits.
vatNumber	string (17)	depends	read close
close Description Local VAT number of the company Depends on: One of the following properties is required for merchants that use Merchant Category Codes (MCC) V4829, V6012, M4829, V6051, M6540: order.customer.personalInformation.dateOfBirth customer.contactDetails.emailAddress order.customer.contactDetails.mobilePhoneNumber order.customer.contactDetails.phoneNumber order.customer.companyInformation.vatNumber order.customer.personalInformation.identification
merchantCustomerId	string (15)	no	read close
close Description Your identifier for the customer. It can be used as a search criteria in the GlobalCollect Payment Console and is also included in the GlobalCollect report files. It is used in the fraud-screening process for payments on the Ogone Payment Platform.
personalInformation	object	no	read close
close Description Object containing personal information of the customer SDK Object type domain.PersonalInformationToken
name	object	no	read close
close Description Given name(s) or first name(s) of the customer SDK Object type domain.PersonalNameToken
firstName	string (15)	no	read close
close Description Given name(s) or first name(s) of the customer
surname	string (70)	no	read close
close Description Surname(s) or last name(s) of the customer
surnamePrefix	string (15)	no	read close
close Description Middle name - In between first name and surname - of the customer
vatNumber	string (17)	no	read close
close Deprecated: Use companyInformation.vatNumber instead Description Local VAT number of the company
data	object	yes	read close
close Description Object containing the card tokenizable details SDK Object type domain.TokenCardData
cardWithoutCvv	object	yes	read close
close Description Object containing the card details (without CVV) SDK Object type domain.CardWithoutCvv
cardNumber	string (19)	depends	read close
close Description The complete credit/debit card number (also know as the PAN). The minimum input length is 12 digits. Depends on: Required for Create and Update token.
cardholderName	string	no	read close
close Description Card holder's name on the card
expiryDate	string (4)	depends	read close
close Description Expiry date of the card Format: MMYY Depends on: Required for Create and Update token.
issueNumber	string (2)	no	read close
close Description Issue number on the card (if applicable)
firstTransactionDate	string (8)	no	read close
close Description Date of the first transaction (for ATOS) Format: YYYYMMDD
providerReference	string (4000)	no	read close
close Description Reference of the provider (of the first transaction) - used to store the ATOS Transaction Certificate
Group eWallet	object	no	read close
close Description Object containing eWallet details SDK Object type domain.TokenEWallet Property is part of a group Learn more Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call. If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.
alias	string (100)	no	read close
close Description An alias for the token. This can be used to visually represent the token. If no alias is given in Create token calls, a payment product specific default is used, e.g. the obfuscated card number for card payment products. Do not include any unobfuscated sensitive data in the alias.
customer	object	yes	read close
close Description Object containing the details of the customer SDK Object type domain.CustomerToken
billingAddress	object	no	read close
close Description Object containing the billing address details SDK Object type domain.Address
additionalInfo	string (50)	no	read close
close Description Additional address information. The additionalInfo is truncated after 10 characters for payments, refunds or payouts that are processed by the WL Online Payment Acceptance platform
city	string	depends	read close
close Description City Note: For payments with product 1503 the maximum length is not 40 but 20. Depends on: Required for Invoice payments (201) Required for Direct Debit UK (705) except when a token has been included in the request that includes this value. Required for the creation of a Payout. Required for payments with product 9000 (AfterPay Installments) or 9001 (AfterPay Invoice). Required for payments with product 6101 (Banco do Brasil), 6102 (Itaú), 6103 (Banrisul), 6104 (Bradesco), 6105 (Pix) or 6107 (PicPay). Required when address is included in Seller.
countryCode	string (2)	no depends no yes no	read close
close Description ISO 3166-1 alpha-2 country code Depends on: Required by the GlobalCollect platform.
houseNumber	string (15)	depends	read close
close Description House number. The houseNumber is truncated after 10 characters for payments, refunds or payouts that are processed by the WL Online Payment Acceptance platform Depends on: Required when address is included in Seller. Required for 6101 (Banco do Brasil), 6102 (Itaú), 6103 (Banrisul), 6104 (Bradesco), 6105 (Pix) and 6107 (PicPay).
state	string (35)	no	read close
close Description Full name of the state or province
stateCode	string	depends	read close
close Description ISO 3166-2 alpha-3 state code Notes: The maximum length for 3-D Secure version 2 is AN3 for payments that are processed by the GlobalCollect platform The maximum length for paymentProductId 1503 (Boleto) is AN2 for payments that are processed by the GlobalCollect platform The maximum length is 3 for payments that are processed by the WL Online Payment Acceptance platform Depends on: Required for payments with paymentProductId 1503 (Boleto), 6101 (Banco do Brasil), 6102 (Itaú), 6103 (Banrisul), 6104 (Bradesco), 6105 (Pix) or 6107 (PicPay).
street	string (50)	depends	read close
close Description Streetname Depends on: Required for Invoice payments (201) Required for Direct Debit UK (705), except when a token has been included in the request that includes this value. Required for the creation of a Payout. Required for payments with product 9000 (AfterPay Installments) or 9001 (AfterPay Invoice). Required for payments with product 6101 (Banco do Brasil), 6102 (Itaú), 6103 (Banrisul), 6104 (Bradesco), 6105 (Pix) or 6107 (PicPay). Required when address is included in Seller.
zip	string	depends	read close
close Description Zip code Note: For payments with product 1503 the maximum length is not 10 but 8. Depends on: Required for Direct Debit UK (705) except when a token has been included in the request that includes this value. Required for payments with product 9000 (AfterPay Installments) or 9001 (AfterPay Invoice). Required for payments with product 6101 (Banco do Brazil), 6102 (Itaú), 6103 (Banrisul), 6104 (Bradesco), 6105 (Pix) or 6107 (PicPay).
companyInformation	object	no	read close
close Description Object containing company information SDK Object type domain.CompanyInformation
name	string (40)	depends depends no no no	read close
close Description Name of company, as a customer Depends on: Required for payments when the property order.customer.fiscalNumber is set to: Argentina: Company (CUIT) - 11 digits. Brazil: Company (CNPJ) - 14 digits. Depends on: Required by the WOPA platform for payments when the property order.customer.fiscalNumber is set to: Argentina: Company (CUIT) - 11 digits. Brazil: Company (CNPJ) - 14 digits.
vatNumber	string (17)	depends	read close
close Description Local VAT number of the company Depends on: One of the following properties is required for merchants that use Merchant Category Codes (MCC) V4829, V6012, M4829, V6051, M6540: order.customer.personalInformation.dateOfBirth customer.contactDetails.emailAddress order.customer.contactDetails.mobilePhoneNumber order.customer.contactDetails.phoneNumber order.customer.companyInformation.vatNumber order.customer.personalInformation.identification
merchantCustomerId	string (15)	no	read close
close Description Your identifier for the customer. It can be used as a search criteria in the GlobalCollect Payment Console and is also included in the GlobalCollect report files. It is used in the fraud-screening process for payments on the Ogone Payment Platform.
personalInformation	object	no	read close
close Description Object containing personal information of the customer SDK Object type domain.PersonalInformationToken
name	object	no	read close
close Description Given name(s) or first name(s) of the customer SDK Object type domain.PersonalNameToken
firstName	string (15)	no	read close
close Description Given name(s) or first name(s) of the customer
surname	string (70)	no	read close
close Description Surname(s) or last name(s) of the customer
surnamePrefix	string (15)	no	read close
close Description Middle name - In between first name and surname - of the customer
vatNumber	string (17)	no	read close
close Deprecated: Use companyInformation.vatNumber instead Description Local VAT number of the company
data	object	yes	read close
close Description Object containing the eWallet tokenizable data SDK Object type domain.TokenEWalletData
billingAgreementId	string (50)	depends	read close
close Description Identification of the PayPal recurring billing agreement Depends on: Required for the creation of a PayPal token.
Group nonSepaDirectDebit	object	no	read close
close Description Object containing non SEPA Direct Debit details SDK Object type domain.TokenNonSepaDirectDebit Property is part of a group Learn more Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call. If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.
alias	string (100)	no	read close
close Description An alias for the token. This can be used to visually represent the token. If no alias is given in Create token calls, a payment product specific default is used, e.g. the obfuscated card number for card payment products. Do not include any unobfuscated sensitive data in the alias.
customer	object	yes	read close
close Description Object containing the details of the customer SDK Object type domain.CustomerToken
billingAddress	object	no	read close
close Description Object containing the billing address details SDK Object type domain.Address
additionalInfo	string (50)	no	read close
close Description Additional address information. The additionalInfo is truncated after 10 characters for payments, refunds or payouts that are processed by the WL Online Payment Acceptance platform
city	string	depends	read close
close Description City Note: For payments with product 1503 the maximum length is not 40 but 20. Depends on: Required for Invoice payments (201) Required for Direct Debit UK (705) except when a token has been included in the request that includes this value. Required for the creation of a Payout. Required for payments with product 9000 (AfterPay Installments) or 9001 (AfterPay Invoice). Required for payments with product 6101 (Banco do Brasil), 6102 (Itaú), 6103 (Banrisul), 6104 (Bradesco), 6105 (Pix) or 6107 (PicPay). Required when address is included in Seller.
countryCode	string (2)	no depends no yes no	read close
close Description ISO 3166-1 alpha-2 country code Depends on: Required by the GlobalCollect platform.
houseNumber	string (15)	depends	read close
close Description House number. The houseNumber is truncated after 10 characters for payments, refunds or payouts that are processed by the WL Online Payment Acceptance platform Depends on: Required when address is included in Seller. Required for 6101 (Banco do Brasil), 6102 (Itaú), 6103 (Banrisul), 6104 (Bradesco), 6105 (Pix) and 6107 (PicPay).
state	string (35)	no	read close
close Description Full name of the state or province
stateCode	string	depends	read close
close Description ISO 3166-2 alpha-3 state code Notes: The maximum length for 3-D Secure version 2 is AN3 for payments that are processed by the GlobalCollect platform The maximum length for paymentProductId 1503 (Boleto) is AN2 for payments that are processed by the GlobalCollect platform The maximum length is 3 for payments that are processed by the WL Online Payment Acceptance platform Depends on: Required for payments with paymentProductId 1503 (Boleto), 6101 (Banco do Brasil), 6102 (Itaú), 6103 (Banrisul), 6104 (Bradesco), 6105 (Pix) or 6107 (PicPay).
street	string (50)	depends	read close
close Description Streetname Depends on: Required for Invoice payments (201) Required for Direct Debit UK (705), except when a token has been included in the request that includes this value. Required for the creation of a Payout. Required for payments with product 9000 (AfterPay Installments) or 9001 (AfterPay Invoice). Required for payments with product 6101 (Banco do Brasil), 6102 (Itaú), 6103 (Banrisul), 6104 (Bradesco), 6105 (Pix) or 6107 (PicPay). Required when address is included in Seller.
zip	string	depends	read close
close Description Zip code Note: For payments with product 1503 the maximum length is not 10 but 8. Depends on: Required for Direct Debit UK (705) except when a token has been included in the request that includes this value. Required for payments with product 9000 (AfterPay Installments) or 9001 (AfterPay Invoice). Required for payments with product 6101 (Banco do Brazil), 6102 (Itaú), 6103 (Banrisul), 6104 (Bradesco), 6105 (Pix) or 6107 (PicPay).
companyInformation	object	no	read close
close Description Object containing company information SDK Object type domain.CompanyInformation
name	string (40)	depends depends no no no	read close
close Description Name of company, as a customer Depends on: Required for payments when the property order.customer.fiscalNumber is set to: Argentina: Company (CUIT) - 11 digits. Brazil: Company (CNPJ) - 14 digits. Depends on: Required by the WOPA platform for payments when the property order.customer.fiscalNumber is set to: Argentina: Company (CUIT) - 11 digits. Brazil: Company (CNPJ) - 14 digits.
vatNumber	string (17)	depends	read close
close Description Local VAT number of the company Depends on: One of the following properties is required for merchants that use Merchant Category Codes (MCC) V4829, V6012, M4829, V6051, M6540: order.customer.personalInformation.dateOfBirth customer.contactDetails.emailAddress order.customer.contactDetails.mobilePhoneNumber order.customer.contactDetails.phoneNumber order.customer.companyInformation.vatNumber order.customer.personalInformation.identification
merchantCustomerId	string (15)	no	read close
close Description Your identifier for the customer. It can be used as a search criteria in the GlobalCollect Payment Console and is also included in the GlobalCollect report files. It is used in the fraud-screening process for payments on the Ogone Payment Platform.
personalInformation	object	no	read close
close Description Object containing personal information of the customer SDK Object type domain.PersonalInformationToken
name	object	no	read close
close Description Given name(s) or first name(s) of the customer SDK Object type domain.PersonalNameToken
firstName	string (15)	no	read close
close Description Given name(s) or first name(s) of the customer
surname	string (70)	no	read close
close Description Surname(s) or last name(s) of the customer
surnamePrefix	string (15)	no	read close
close Description Middle name - In between first name and surname - of the customer
vatNumber	string (17)	no	read close
close Deprecated: Use companyInformation.vatNumber instead Description Local VAT number of the company
mandate	object	yes	read close
close Description Object containing the mandate details SDK Object type domain.MandateNonSepaDirectDebit
Group paymentProduct705SpecificData	object	one of the group	read close
close Description Object containing specific data for Direct Debit UK SDK Object type domain.TokenNonSepaDirectDebitPaymentProduct705SpecificData Property is part of a group Learn more Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call. If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.
authorisationId	string (18)	depends	read close
close Description Core reference number for the direct debit instruction in UK Depends on: Required, except when a token has been included in the request that includes this value.
bankAccountBban	object	yes	read close
close Description Object containing account holder name and bank account information SDK Object type domain.BankAccountBban
accountHolderName	string (30)	depends	read close
close Description Name of the account holder Depends on: Required for Create and Update token calls for ACH (730).
accountNumber	string	depends	read close
close Description Bank account number Depends on: Required for Direct Debit UK (705) and ACH (730) payments, except when a token has been included in the request that includes this value. Required for Create and Update token calls.
bankCode	string	depends	read close
close Description Bank code Depends on: Required for Direct Debit UK (705) and ACH (730) payments, except when a token has been included in the request that includes this value. Required for Create and Update token calls for ACH (730).
bankName	string (40)	no	read close
close Description Name of the bank
branchCode	string	no	read close
close Description Branch code
checkDigit	string	no	read close
close Description Bank check digit
countryCode	string (2)	no	read close
close Description ISO 3166-1 alpha-2 country code of the country where the bank account is held For UK payouts this value is automatically set to GB as only payouts to UK accounts are supported.
Group paymentProduct730SpecificData	object	one of the group	read close
close Description Object containing specific data for ACH SDK Object type domain.TokenNonSepaDirectDebitPaymentProduct730SpecificData Property is part of a group Learn more Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call. If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.
bankAccountBban	object	yes	read close
close Description Object containing account holder name and bank account information SDK Object type domain.BankAccountBban
accountHolderName	string (30)	depends	read close
close Description Name of the account holder Depends on: Required for Create and Update token calls for ACH (730).
accountNumber	string	depends	read close
close Description Bank account number Depends on: Required for Direct Debit UK (705) and ACH (730) payments, except when a token has been included in the request that includes this value. Required for Create and Update token calls.
bankCode	string	depends	read close
close Description Bank code Depends on: Required for Direct Debit UK (705) and ACH (730) payments, except when a token has been included in the request that includes this value. Required for Create and Update token calls for ACH (730).
bankName	string (40)	no	read close
close Description Name of the bank
branchCode	string	no	read close
close Description Branch code
checkDigit	string	no	read close
close Description Bank check digit
countryCode	string (2)	no	read close
close Description ISO 3166-1 alpha-2 country code of the country where the bank account is held For UK payouts this value is automatically set to GB as only payouts to UK accounts are supported.
Group sepaDirectDebit	object	no	read close
close Description Object containing SEPA Direct Debit details SDK Object type domain.TokenSepaDirectDebitWithoutCreditor Property is part of a group Learn more Properties that make up a group are mutually exclusive, which means you can only include one of each group in any given call. If there are multiple groups at one level in the object hierarchy we use numbers to distinguish groups from one another.
alias	string (100)	no	read close
close Description An alias for the token. This can be used to visually represent the token. If no alias is given in Create token calls, a payment product specific default is used, e.g. the obfuscated card number for card payment products. Do not include any unobfuscated sensitive data in the alias.
customer	object	yes	read close
close Description Object containing the details of the customer SDK Object type domain.CustomerTokenWithContactDetails
billingAddress	object	depends	read close
close Description Object containing the billing address details Depends on: Required for the creation of a token for the countryCode property within this object. SDK Object type domain.Address
additionalInfo	string (50)	no	read close
close Description Additional address information. The additionalInfo is truncated after 10 characters for payments, refunds or payouts that are processed by the WL Online Payment Acceptance platform
city	string	depends	read close
close Description City Note: For payments with product 1503 the maximum length is not 40 but 20. Depends on: Required for Invoice payments (201) Required for Direct Debit UK (705) except when a token has been included in the request that includes this value. Required for the creation of a Payout. Required for payments with product 9000 (AfterPay Installments) or 9001 (AfterPay Invoice). Required for payments with product 6101 (Banco do Brasil), 6102 (Itaú), 6103 (Banrisul), 6104 (Bradesco), 6105 (Pix) or 6107 (PicPay). Required when address is included in Seller.
countryCode	string (2)	no depends no yes no	read close
close Description ISO 3166-1 alpha-2 country code Depends on: Required by the GlobalCollect platform.
houseNumber	string (15)	depends	read close
close Description House number. The houseNumber is truncated after 10 characters for payments, refunds or payouts that are processed by the WL Online Payment Acceptance platform Depends on: Required when address is included in Seller. Required for 6101 (Banco do Brasil), 6102 (Itaú), 6103 (Banrisul), 6104 (Bradesco), 6105 (Pix) and 6107 (PicPay).
state	string (35)	no	read close
close Description Full name of the state or province
stateCode	string	depends	read close
close Description ISO 3166-2 alpha-3 state code Notes: The maximum length for 3-D Secure version 2 is AN3 for payments that are processed by the GlobalCollect platform The maximum length for paymentProductId 1503 (Boleto) is AN2 for payments that are processed by the GlobalCollect platform The maximum length is 3 for payments that are processed by the WL Online Payment Acceptance platform Depends on: Required for payments with paymentProductId 1503 (Boleto), 6101 (Banco do Brasil), 6102 (Itaú), 6103 (Banrisul), 6104 (Bradesco), 6105 (Pix) or 6107 (PicPay).
street	string (50)	depends	read close
close Description Streetname Depends on: Required for Invoice payments (201) Required for Direct Debit UK (705), except when a token has been included in the request that includes this value. Required for the creation of a Payout. Required for payments with product 9000 (AfterPay Installments) or 9001 (AfterPay Invoice). Required for payments with product 6101 (Banco do Brasil), 6102 (Itaú), 6103 (Banrisul), 6104 (Bradesco), 6105 (Pix) or 6107 (PicPay). Required when address is included in Seller.
zip	string	depends	read close
close Description Zip code Note: For payments with product 1503 the maximum length is not 10 but 8. Depends on: Required for Direct Debit UK (705) except when a token has been included in the request that includes this value. Required for payments with product 9000 (AfterPay Installments) or 9001 (AfterPay Invoice). Required for payments with product 6101 (Banco do Brazil), 6102 (Itaú), 6103 (Banrisul), 6104 (Bradesco), 6105 (Pix) or 6107 (PicPay).
companyInformation	object	no	read close
close Description Object containing company information SDK Object type domain.CompanyInformation
name	string (40)	depends depends no no no	read close
close Description Name of company, as a customer Depends on: Required for payments when the property order.customer.fiscalNumber is set to: Argentina: Company (CUIT) - 11 digits. Brazil: Company (CNPJ) - 14 digits. Depends on: Required by the WOPA platform for payments when the property order.customer.fiscalNumber is set to: Argentina: Company (CUIT) - 11 digits. Brazil: Company (CNPJ) - 14 digits.
vatNumber	string (17)	depends	read close
close Description Local VAT number of the company Depends on: One of the following properties is required for merchants that use Merchant Category Codes (MCC) V4829, V6012, M4829, V6051, M6540: order.customer.personalInformation.dateOfBirth customer.contactDetails.emailAddress order.customer.contactDetails.mobilePhoneNumber order.customer.contactDetails.phoneNumber order.customer.companyInformation.vatNumber order.customer.personalInformation.identification
contactDetails	object	no	read close
close Description Object containing contact details like email address and phone number SDK Object type domain.ContactDetailsToken
emailAddress	string (70)	no	read close
close Description Email address of the customer
emailMessageType	string	no	read close
close Description Preference for the type of email message markup plain-text html
merchantCustomerId	string (15)	no	read close
close Description Your identifier for the customer. It can be used as a search criteria in the GlobalCollect Payment Console and is also included in the GlobalCollect report files. It is used in the fraud-screening process for payments on the Ogone Payment Platform.
personalInformation	object	no	read close
close Description Object containing personal information of the customer SDK Object type domain.PersonalInformationToken
name	object	no	read close
close Description Given name(s) or first name(s) of the customer SDK Object type domain.PersonalNameToken
firstName	string (15)	no	read close
close Description Given name(s) or first name(s) of the customer
surname	string (70)	no	read close
close Description Surname(s) or last name(s) of the customer
surnamePrefix	string (15)	no	read close
close Description Middle name - In between first name and surname - of the customer
vatNumber	string (17)	no	read close
close Deprecated: Use companyInformation.vatNumber instead Description Local VAT number of the company
mandate	object	yes	read close
close Description Object containing the mandate details SDK Object type domain.MandateSepaDirectDebitWithoutCreditor
bankAccountIban	object	depends	read close
close Description Object containing Account holder and IBAN information Depends on: Required for the creation of a token for the iban property within this object. SDK Object type domain.BankAccountIban
accountHolderName	string (30)	depends	read close
close Description Name in which the account is held. Depends on: Required for the creation of a Payout Required for Create and Update token calls.
iban	string (50)	depends	read close
close Description The IBAN is the International Bank Account Number. It is an internationally agreed format for the BBAN and includes the ISO country code and two check digits. Depends on: Required for the creation of a Payout Required for Create and Update token. Required for payments with product 9000 (AfterPay Installments) in Austria (AT) and Germany (DE). Required for Create mandate and Create payment with mandate calls
customerContractIdentifier	string (35)	no	read close
close Description Identifies the contract between customer and merchant
debtor	object	depends	read close
close Description Object containing information on the debtor Depends on: Required for the creation of a token for the surname property within this object. SDK Object type domain.Debtor
additionalAddressInfo	string (50)	no	read close
close Description Additional information about the debtor's address, like Suite II, Apartment 2a
city	string (51)	no	read close
close Description City of the debtor's address
countryCode	string (2)	no	read close
close Description ISO 3166-1 alpha-2 country code of the debtor's address
firstName	string (15)	no	read close
close Description Debtor first name
houseNumber	string (15)	no	read close
close Description House number of the debtor's address
state	string (35)	no	read close
close Description State of debtor address
stateCode	string (9)	depends	read close
close Description ISO 3166-2 alpha-3 state code Notes: The maximum length for 3-D Secure version 2 is AN3. The maximum length for paymentProductId 1503 (Boleto) is AN2. Depends on: Required for payments with paymentProductId 1503 (Boleto)
street	string (50)	no	read close
close Description Street of debtor's address
surname	string (70)	depends	read close
close Description Debtor's last name Depends on: Required for the creation of a token.
surnamePrefix	string (15)	no	read close
close Description Prefix of the debtor's last name
zip	string (10)	no	read close
close Description ZIP code of the debtor's address
isRecurring	boolean	no	read close
close Description true false
mandateApproval	object	no	read close
close Description Object containing the details of the mandate approval SDK Object type domain.MandateApproval
mandateSignatureDate	string (8)	no	read close
close Description The date when the mandate was signed Format: YYYYMMDD
mandateSignaturePlace	string (51)	no	read close
close Description The city where the mandate was signed
mandateSigned	boolean	no	read close
close Description true = Mandate is signed false = Mandate is not signed
preNotification	string	no	read close
close Description Indicates whether a pre-notification should be sent to the customer. do-not-send - Do not send a pre-notification send-on-first-collection - Send a pre-notification
encryptedCustomerInput	string	no	read close
close Description Data that was encrypted client side containing all customer entered data elements like card data. Note: Because this data can only be submitted once to our system and contains encrypted card data you should not store it. As the data was captured within the context of a client session you also need to submit it to us before the session has expired.
paymentProductId	integer (5)	depends depends no no no	read close
close Description Payment product identifier Please see payment products for a full overview of possible values. Depends on: Required for creating tokens Depends on: Required by the WOPA platform for creating tokens

Request example

SDK: Go

This scenario you will probably use the most

// Assigning literals to pointer variables directly is not supported.
// The below code uses helper functions connectsdk.NewInt32 and connectsdk.NewString to overcome this issue.
// These helper functions are provided by the SDK's root package.
// http://stackoverflow.com/a/30716481 lists a few more alternatives.

var billingAddress domain.Address
billingAddress.AdditionalInfo = connectsdk.NewString("Suite II")
billingAddress.City = connectsdk.NewString("Monument Valley")
billingAddress.CountryCode = connectsdk.NewString("US")
billingAddress.HouseNumber = connectsdk.NewString("1")
billingAddress.State = connectsdk.NewString("Utah")
billingAddress.Street = connectsdk.NewString("Desertroad")
billingAddress.Zip = connectsdk.NewString("84536")

var companyInformation domain.CompanyInformation
companyInformation.Name = connectsdk.NewString("Acme Labs")

var name domain.PersonalNameToken
name.FirstName = connectsdk.NewString("Wile")
name.Surname = connectsdk.NewString("Coyote")
name.SurnamePrefix = connectsdk.NewString("E.")

var personalInformation domain.PersonalInformationToken
personalInformation.Name = &name

var customer domain.CustomerToken
customer.BillingAddress = &billingAddress
customer.CompanyInformation = &companyInformation
customer.MerchantCustomerID = connectsdk.NewString("1234")
customer.PersonalInformation = &personalInformation

var bankAccountBban domain.BankAccountBban
bankAccountBban.AccountNumber = connectsdk.NewString("000000123456")
bankAccountBban.BankCode = connectsdk.NewString("05428")
bankAccountBban.BranchCode = connectsdk.NewString("11101")
bankAccountBban.CheckDigit = connectsdk.NewString("X")
bankAccountBban.CountryCode = connectsdk.NewString("IT")

var paymentProduct705SpecificData domain.TokenNonSepaDirectDebitPaymentProduct705SpecificData
paymentProduct705SpecificData.AuthorisationID = connectsdk.NewString("123456")
paymentProduct705SpecificData.BankAccountBban = &bankAccountBban

var mandate domain.MandateNonSepaDirectDebit
mandate.PaymentProduct705SpecificData = &paymentProduct705SpecificData

var nonSepaDirectDebit domain.TokenNonSepaDirectDebit
nonSepaDirectDebit.Customer = &customer
nonSepaDirectDebit.Mandate = &mandate

var body domain.CreateTokenRequest
body.NonSepaDirectDebit = &nonSepaDirectDebit
body.PaymentProductID = connectsdk.NewInt32(705)

response, err := client.V1().Merchant("merchantId").Tokens().Create(body, nil)

// Assigning literals to pointer variables directly is not supported.
// The below code uses helper functions connectsdk.NewInt32 and connectsdk.NewString to overcome this issue.
// These helper functions are provided by the SDK's root package.
// http://stackoverflow.com/a/30716481 lists a few more alternatives.

var billingAddress domain.Address
billingAddress.CountryCode = connectsdk.NewString("US")

var customer domain.CustomerToken
customer.BillingAddress = &billingAddress

var cardWithoutCvv domain.CardWithoutCvv
cardWithoutCvv.CardNumber = connectsdk.NewString("****************")
cardWithoutCvv.ExpiryDate = connectsdk.NewString("****")

var data domain.TokenCardData
data.CardWithoutCvv = &cardWithoutCvv

var card domain.TokenCard
card.Customer = &customer
card.Data = &data

var body domain.CreateTokenRequest
body.Card = &card
body.PaymentProductID = connectsdk.NewInt32(1)

response, err := client.V1().Merchant("merchantId").Tokens().Create(body, nil)

// Assigning literals to pointer variables directly is not supported.
// The below code uses helper functions connectsdk.NewInt32 and connectsdk.NewString to overcome this issue.
// These helper functions are provided by the SDK's root package.
// http://stackoverflow.com/a/30716481 lists a few more alternatives.

var billingAddress domain.Address
billingAddress.AdditionalInfo = connectsdk.NewString("b")
billingAddress.City = connectsdk.NewString("Monument Valley")
billingAddress.CountryCode = connectsdk.NewString("US")
billingAddress.HouseNumber = connectsdk.NewString("13")
billingAddress.State = connectsdk.NewString("Utah")
billingAddress.Street = connectsdk.NewString("Desertroad")
billingAddress.Zip = connectsdk.NewString("84536")

var companyInformation domain.CompanyInformation
companyInformation.Name = connectsdk.NewString("Acme Labs")

var name domain.PersonalNameToken
name.FirstName = connectsdk.NewString("Wile")
name.Surname = connectsdk.NewString("Coyote")
name.SurnamePrefix = connectsdk.NewString("E.")

var personalInformation domain.PersonalInformationToken
personalInformation.Name = &name

var customer domain.CustomerToken
customer.BillingAddress = &billingAddress
customer.CompanyInformation = &companyInformation
customer.MerchantCustomerID = connectsdk.NewString("1234")
customer.PersonalInformation = &personalInformation

var cardWithoutCvv domain.CardWithoutCvv
cardWithoutCvv.CardNumber = connectsdk.NewString("****************")
cardWithoutCvv.CardholderName = connectsdk.NewString("Wile E. Coyote")
cardWithoutCvv.ExpiryDate = connectsdk.NewString("****")

var data domain.TokenCardData
data.CardWithoutCvv = &cardWithoutCvv

var card domain.TokenCard
card.Customer = &customer
card.Data = &data

var body domain.CreateTokenRequest
body.Card = &card
body.PaymentProductID = connectsdk.NewInt32(1)

response, err := client.V1().Merchant("merchantId").Tokens().Create(body, nil)

Responses

When we are able to tokenize the payment details two possible responses can occur:

HTTP Response 200 is returned when you try to tokenize card details for a card that has already been tokenized in the past
HTTP Response 201 is returned when the system successfully created a new token

When we are unable to tokenize the payment details an HTTP response in the 4XX or 5XX range is returned.

Response 200 - OKdomain.CreateTokenResponse

An HTTP 200 response indicates that the card data was previously tokenized. The previous token is returned again. The evaluation regarding duplication is done purely on the card number. Please note that it is possible that the data other than the card number is different from the stored data, in that case you may need to update the token with the new data.

Property	Type	Required	Details
Properties Expand all properties Hide deprecated properties
isNewToken	boolean	no	read close
close Description Indicates if a new token was created true - A new token was created false - A token with the same card number already exists and is returned. Please note that the existing token has not been updated. When you want to update other data then the card number, you need to use the update API call, as data is never updated during the creation of a token.
originalPaymentId	string	no	read close
close Description The initial Payment ID of the transaction from which the token has been created
token	string	no	read close
close Description ID of the token

Response example

SDK: Go

This scenario you will probably use the most

{
    "isNewToken" : false,
    "token" : "49575a9c-5bd5-4539-a672-b5b4e7abf681"
}

Response 201 - Createddomain.CreateTokenResponse

An HTTP 201 response indicates that the data was successfully tokenized and the newly created token is returned.

Property	Type	Required	Details
Properties Expand all properties Hide deprecated properties
isNewToken	boolean	no	read close
close Description Indicates if a new token was created true - A new token was created false - A token with the same card number already exists and is returned. Please note that the existing token has not been updated. When you want to update other data then the card number, you need to use the update API call, as data is never updated during the creation of a token.
originalPaymentId	string	no	read close
close Description The initial Payment ID of the transaction from which the token has been created
token	string	no	read close
close Description ID of the token

Response example

SDK: Go

This scenario you will probably use the most

{
    "isNewToken" : true,
    "token" : "49575a9c-5bd5-4539-a672-b5b4e7abf681"
}

Response 400 - Bad requestdomain.ErrorResponse

Property	Type	Required	Details
Properties Expand all properties Hide deprecated properties
errorId	string	yes	read close
close Description Unique reference, for debugging purposes, of this error response
errors	array of object	yes	read close
close Description List of one or more errors
items	object	no	read close
close Description Contains detailed information on one single error. SDK Object type domain.APIError
category	string	no	read close
close Description Category the error belongs to. The category should give an indication of the type of error you are dealing with. Possible values: CONNECT_PLATFORM_ERROR - indicating that a functional error has occurred in the Connect platform. PAYMENT_PLATFORM_ERROR - indicating that a functional error has occurred in the Payment platform. IO_ERROR - indicating that a technical error has occurred within the Connect platform or between Connect and any of the payment platforms or third party systems.
code	string	yes	read close
close Description Error code
httpStatusCode	integer	no	read close
close Description HTTP status code for this error that can be used to determine the type of error
id	string	no	read close
close Description ID of the error. This is a short human-readable message that briefly describes the error.
message	string	no	read close
close Description Human-readable error message that is not meant to be relayed to customer as it might tip off people who are trying to commit fraud
propertyName	string	no	read close
close Description Returned only if the error relates to a value that was missing or incorrect. Contains a location path to the value as a JSonata query. Some common examples: a.b selects the value of property b of root property a, a[1] selects the first element of the array in root property a, a[b='some value'] selects all elements of the array in root property a that have a property b with value 'some value'.
requestId	string	no	read close
close Description ID of the request that can be used for debugging purposes

Response example

SDK: Go

This scenario you will probably use the most

{
    "errorId" : "15eabcd5-30b3-479b-ae03-67bb351c07e6-00000092",
    "errors" : [
        {
            "code" : "20000000",
            "propertyName" : "bankAccountBban.accountNumber",
            "message" : "PARAMETER_NOT_FOUND_IN_REQUEST"
        }
    ]
}

Response 403 - Unauthorizeddomain.ErrorResponse

When something is wrong with your credentials you will get a 403 response. This could happen when your account is not allowed to tokenize any payment data.

Property	Type	Required	Details
Properties Expand all properties Hide deprecated properties
errorId	string	yes	read close
close Description Unique reference, for debugging purposes, of this error response
errors	array of object	yes	read close
close Description List of one or more errors
items	object	no	read close
close Description Contains detailed information on one single error. SDK Object type domain.APIError
category	string	no	read close
close Description Category the error belongs to. The category should give an indication of the type of error you are dealing with. Possible values: CONNECT_PLATFORM_ERROR - indicating that a functional error has occurred in the Connect platform. PAYMENT_PLATFORM_ERROR - indicating that a functional error has occurred in the Payment platform. IO_ERROR - indicating that a technical error has occurred within the Connect platform or between Connect and any of the payment platforms or third party systems.
code	string	yes	read close
close Description Error code
httpStatusCode	integer	no	read close
close Description HTTP status code for this error that can be used to determine the type of error
id	string	no	read close
close Description ID of the error. This is a short human-readable message that briefly describes the error.
message	string	no	read close
close Description Human-readable error message that is not meant to be relayed to customer as it might tip off people who are trying to commit fraud
propertyName	string	no	read close
close Description Returned only if the error relates to a value that was missing or incorrect. Contains a location path to the value as a JSonata query. Some common examples: a.b selects the value of property b of root property a, a[1] selects the first element of the array in root property a, a[b='some value'] selects all elements of the array in root property a that have a property b with value 'some value'.
requestId	string	no	read close
close Description ID of the request that can be used for debugging purposes

Response example

SDK: Go

This scenario you will probably use the most

{
    "errorId" : "657b10da-d2f9-4088-a948-bf190ef516b1-000002b4",
    "errors" : [
        {
            "code" : "700660",
            "message" : "SERVICE_NOT_ALLOWED"
        }
    ]
}

Create token

Tokens

Request

Tokenization using Encrypted Customer Input

Payloaddomain.CreateTokenRequest

Description

Description

Description

Depends on:

Description

Description

Description

Depends on:

Description

Depends on:

Description

Depends on:

Description

Description

Depends on:

Description

Depends on:

Description

Depends on:

Description

Description

Depends on:

Depends on:

Description

Depends on:

Description

Description

Description

Description

Description

Description

Description

Description

Description

Description

Depends on:

Description

Description

Depends on:

Description

Description

Description

Description

Description

Description

Description

Description

Description

Depends on:

Description

Depends on:

Description

Depends on:

Description

Description

Depends on:

Description

Depends on:

Description

Depends on:

Description

Description

Depends on:

Depends on:

Description

Depends on:

Description

Description

Description

Description

Description

Description

Description

Description

Description